RIDGID PC-1375 Handleiding
Pagina's 1 Engels Niet gecategoriseerd
Bekijk de handleiding van RIDGID PC-1375 gratis online of download de PDF. Deze handleiding is 17 keer bekeken. Vraag over dit model? Stel een vraag
Blade Installation
1.Place new blade into cutter so that the roller enters the
blade slot.
Figure 3
2.Reinstall “PC-1375” half of the handle.
3.Reinstall and tighten the three mounting screws.
4.Line up the lower handle hole and blade hole. Reinstall
the blade pin and the retaining ring.
Figure 4
PC-1375 Blade Change Instructions
Ridge Tool Co.,Elyria,Ohio,U.S.A.
10/07
Printed in U.S.A.010-338-222.10
Rev. A
PC-1375 Plastic Pipe and Tubing
Cutter Blade Change Instructions
WARNING
•Always wear safety goggles.
•Blade is sharp. Handle with care.
Blade Removal
1.Unlatch the handles so that they are fully open.
2.Remove retaining ring from the blade pin and remove
the blade pin
3.Lay the cutter on a flat surface with the “PC-1375” logo
facing up and remove the screws.
Figure 1
4.Remove the “PC-1375” half of the cutter handle.
5.Remove the blade.
Figure 2 – Blade Removal
Unlatch
Retaining Ring
and Pin
Screws
Install Blade
Over Roller
Unlatch
Retaining Ring
and Pin
Screws
Product specificaties
| Merk: | RIDGID |
| Categorie: | Niet gecategoriseerd |
| Model: | PC-1375 |
Heb je hulp nodig?
Als je hulp nodig hebt met RIDGID PC-1375 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden