RIDGID K-1500G Handleiding

RIDGID Niet gecategoriseerd K-1500G

Lees hieronder de 📖 handleiding in het Nederlandse voor RIDGID K-1500G (21 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 152 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
Drain Cleaning
Machine
OPERATOR’S
MANUAL
• Français – 13
• Castellano – pág. 27
K-1500G
WARNING!
Read this Operator’s Manual
carefully before using this tool.
Failure to understand and fol-
low the contents of this manual
may result in carbon monoxide
poisoning, fire and/or serious
personal injury.
K-1500G Drain Cleaning Machine
Ridge Tool Company2
General Safety Information
WARNING! Read and understand all instructions. Failure
to follow all instructions listed below may
result in carbon monoxide poisoning, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS!
Work Area Safety
•Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
•Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Tools create sparks which
may ignite the dust or fumes.
•Keep bystanders, children, and visitors away while
operating a tool. Distractions can cause you to lose
control.
•Keep the engine at least one meter (3 feet) away
from buildings and other equipment during oper-
ation. Do not place flammable objects close to
engine. Procedures should be followed to prevent fire
hazards and to provide adequate ventilation.
Personal Safety
•Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use tool while tired or under the influence of drugs,
alcohol, or medications. A moment of inattention
while operating power tools may result in serious per-
sonal injury.
•Dress properly. Do not wear loose clothing or jew-
elry. Contain long hair. Keep your hair, clothing, and
gloves away from moving parts. Loose clothes, jew-
elry, or long hair can be caught in moving parts.
•Remove adjusting keys or wrenches before turning
the tool ON. A wrench or a key that is left attached to
a rotating part of the tool may result in personal injury.
•Do not over-reach. Keep proper footing and bal-
ance at all times. Proper footing and balance enables
better control of the tool in unexpected situations.
•Use safety equipment. Always wear eye protection.
Dust mask, non-skid safety shoes, hard hat, or hear-
ing protection must be used for appropriate conditions.
Tool Use and Care
•Do not force tool. Use the correct tool for your
application. The correct tool will do the job better and
safer at the rate for which it is designed.
•Store idle tools out of the reach of children and
other untrained persons. Tools are dangerous in
the hands of untrained users.
•Maintain tools with care. Keep cutting tools sharp
and clean. Properly maintained tools with sharp cutting
edges are less likely to bind and are easier to control.
•Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that
may affect the tool’s operation. If damaged, have the
tool serviced before using. Many accidents are
caused by poorly maintained tools.
•Use only accessories that are recommended by the
manufacturer for your tool. Accessories that may
be suitable for one tool may become hazardous when
used on another tool.
•Disconnect the spark plug wire before making any
adjustments or repairing tool. Such preventative
measures reduce the risk of starting the tool acciden-
tally.
•Keep handles dry and clean; free from oil and
grease. Allows for better control of the tool.
Service
•Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified repair personnel could result in injury.
•When servicing a tool, use only identical replace-
ment parts. Follow instructions in the Maintenance
Section of this manual. Use of unauthorized parts or
failure to follow maintenance instructions may create a
risk of injury.
Specific Safety Information
WARNING
Read this operator’s manual carefully before using
the K-1500G Drain Cleaner. Failure to understand
and follow the contents of this manual may result
in carbon monoxide poisoning, fire and/or serious
personal injury.
Call the Ridge Tool Company, Technical Service Depart-
ment at (800) 519-3456 if you have any questions.
Machine Safety
•Wear leather mitt provided with the machine. Never
grasp a rotating cable with a rag or glove. Could be-
come wrapped around the cable and cause serious
injury.
•Do not overstress cables. Keep hand on the cable
K-1500G Drain Cleaning Machine
Ridge Tool Company4
Machine Assembly
WARNING
To prevent serious injury, proper assembly of the
K-1500G Drain Cleaning Machine is required. The
following procedures should be followed:
Instructions for Installing Handle
1. Insert handle assembly into handle opening in base
and attach by means of four 3/8wbolts provided
(Figure 1).
Catalog Model
No. No. Description
62840 T-1 Straight Auger
61800 T-2 Heavy-Duty Straight Auger
63105 T-3 Funnel Auger
61790 T-4 Heavy-Duty Funnel Auger
63190 T-5 Straight Retrieving Auger
63195 T-6 Funnel Retrieving Auger
63200 T-7 Hook Auger
63205 T-8 Grease Cutter, 21/2w
63210 T-9 Grease Cutter, 31/2w
62845 T-10 Grease Cutter, 41/2w
59480 T-11 “H” Cutter, 21/2w
59485 T-12 “H” Cutter, 31/2w
61970 T-13 Sawtooth Cutter, 2
1/2w
61975 T-14 Sawtooth Cutter, 3
1/2w
61770 T-15A Expanding Cutter, 4 - 6w w
61825 T-15B Expanding Cutter, 6 - 8w w
61960 T-16 Spiral Bar Cutter, 4w
61850 T-17 Spiral Bar Cutter, 6w
61855 T-18 Spiral Bar Cutter, 8w
59625 T-21 Spiral Sawtooth Cutter, 21
/2w
63075 T-22 Spiral Sawtooth Cutter, 3w
63085 T-23 Spiral Sawtooth Cutter, 4w
59765 T-24 4-Blade Cutter, 2 1
/2
w
59770 T-25 4-Blade Cutter, 3 1
/2
w
59775 T-26 4-Blade Cutter, 4 1
/2
w
59780 T-26A 4-Blade Cutter, 5 1
/2
w
98030 T-50 Three Blade, 3 4 5w < w< w
98035 T-50-1 Sharktooth Cutter, 3w
98040 T-50-2 Sharktooth Cutter, 4w
98045 T-50-3 Sharktooth Cutter, 6w
63110 T-31 Chain Knocker, 3 4 Pipew < w
63115 T-32 Chain Knocker, 6 Pipew
63120 T-33 Chain Knocker, 8 Pipew
63145 T-38 Flue Brush, 11/
2w
63150 T-39 Flue Brush, 2w
63155 T-40 Flue Brush, 21/
2w
63160 T-41 Flue Brush, 3w
63165 T-42 Flue Brush, 31/
2w
63170 T-43 Flue Brush, 4w
63175 T-44 Flue Brush, 41/
2w
63240 T-45 Flue Brush, 5w
63180 T-46 Flue Brush, 51/
2w
63185 T-47 Flue Brush, 6w
Tools for C-11, C-12, C-14 and C-15 Cables 11/4w
NOTE! See Ridge Tool Catalog for complete listing of
tools and accessories.
Catalog Model
No. No. Description
92280 C-11 15 Standard All-Purpose Wind, v3/8wPitch.
Good for 4 Traps, 3 - 8 Lines.w w w
62285 C-12 15 Extra-Heavy-Duty Wind, v3/8wPitch.
4 - 10 Long Runs, No 4 Traps.w w w
62295 C-14 15vHeavy-Duty Wind, 1/2w w wPitch. 3 - 10 Lines
Through Cleanout, No 4wTraps.
62300 C-15 15 Extra-Flexible Wind, v1
/2w w wPitch. 3 - 6 Lines
Good for Traps.
63090 T-27 11/4w vx 25 Leader
62275 C-10 15 Standard All-Purpose Wind, v
Requires A-368X Jaws and 7/8wTools
Cables and Leaders
Standard Equipment
Machine Options
Catalog Model
No. No. Description
44587 K-1500G Machine Only with A-1 Glove, A-12
Coupling Pin Key and A-34-10 Rear
Guide Hose
48462 K-1500G Machine with Standard Equipment,
w/C-14 includes:
– Ten Sections Of C-14 Cable,
Total 150 Feet
– Three A-8 Cable Carriers
– A-1 Left-Hand Mitt
– A-12 Coupling Pin Key
– A-34-12 Rear Guide Hose
– A-2864 Hex Key
– A-3516 Hex Key
– A-3 Tool Box
– T-2 Heavy-Duty Straight Auger
– T-4 Heavy-Duty Funnel Auger
– T-6 Retrieving Auger
– T-8 Grease Cutter
– T-13 Sawtooth Cutter
– T-50 Sharktooth Cutter
NOTE! C-10 (7/8w wDia.) cable should be used to clean 2 diameter
drains. Requires A-368X jawset and 7
/8wtools.

Product specificaties

Merk: RIDGID
Categorie: Niet gecategoriseerd
Model: K-1500G

Heb je hulp nodig?

Als je hulp nodig hebt met RIDGID K-1500G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd RIDGID

RIDGID

RIDGID HKO-186 Handleiding

5 Maart 2024
RIDGID

RIDGID Raprench 10 Handleiding

5 Maart 2024
RIDGID

RIDGID KT-190 Handleiding

5 Maart 2024
RIDGID

RIDGID 760 FXP Handleiding

27 Februari 2024
RIDGID

RIDGID 700 Handleiding

26 Februari 2024
RIDGID

RIDGID KWIK-SPIN+ Handleiding

26 Februari 2024
RIDGID

RIDGID 690-I Handleiding

26 Februari 2024
RIDGID

RIDGID 600-I Handleiding

26 Februari 2024
RIDGID

RIDGID Power Spin+ Handleiding

26 Augustus 2023
RIDGID

RIDGID SeekTech SR-24LE Handleiding

17 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024