RIDGID 246S Handleiding
RIDGID
Snijmachine
246S
Lees hieronder de 📖 handleiding in het Nederlandse voor RIDGID 246S (31 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/31
206/226/246/286
Soil Pipe Cutters
Soil Pipe Cutters Manual
•Français – 7
•Castellano – pág. 17
226
206/246
286
206/226/246/286
ii 999-998-611.10_REV. C
Soil Pipe Cutters
Table of Contents
Safety Symbols....................................................................................................................1i
Soil Pipe Cutter Safety.........................................................................................................1
RIDGID Contact Information................................................................................................1
Description............................................................................................................................1
226 In-Place Soil Pipe Cutter ............................................................................................2
206 and 246 Soil Pipe Cutters...........................................................................................2
286 Soil Pipe Cutter...........................................................................................................2
Specifications.......................................................................................................................2
Soil Pipe Cutter Capacity Chart.........................................................................................3
Pre-Operation Inspection and Maintenance ......................................................................3
Tool Set-Up and Operation ..................................................................................................3
226 Set-Up and Operation ................................................................................................4
206/246 Set-Up and Operation .........................................................................................5
286 Set-Up and Operation ................................................................................................5
Cutting Tips........................................................................................................................6
Lengthening Soil Pipe Cutter Chain ...................................................................................6
To Add A Chain Extension Assembly To Your Chain ..........................................................6
*Original Instructions - English
WARN I NG !
Read this Operator’s Man ual
carefully before using this
tool. Failure to understand
and follow the contents of this
manual may result in electri-
cal shock, fire and/or serious
person al injury.
226
206/246
286
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
WARNING
Safety Symbols
In this operator’s manual and on the product, safety symbols and signal words are used to
communicate important safety information. This section is provided to improve under-
standing of these signal words and symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey
all safety messages that follow this symbol to avoid possible injury or death.
This symbol means read the operator’s manual carefully before using the equipment. The op-
erator’s manual contains important information on the safe and proper operation of the equip-
ment.
This symbol means always wear safety glasses with side shields or goggles when handling
or using this equipment to reduce the risk of eye injury.
1
999-998-611.10_REV. C
Soil Pipe Cutters
power tools can overload the soil pipe cut-
ter and cause tool failure and or serious
personal injury.
•Do not overreach. Keep proper footing
and balance at all times. Proper footing
and balance enables better control of the
tool in unexpected situations.
RIDGID Contact
Information
If you have any question concerning this
RIDGID®product:
– Contact your local RIDGID distributor.
– Visit RIDGID.com to find your local
RIDGID contact point.
– Contact Ridge Tool Technical Service
De part ment at rtctechservices@emer -
son.com, or in the U.S. and Canada call
(800) 519-3456.
Description
RIDGID®Soil Pipe Cutters are used to cut a va-
riety of cast iron soil pipe and can also be
used on concrete and clay pipe. All RIDGID
Soil Pipe Cutters use chains equipped with
cutter wheels that are tightened around the
pipe until the pipe breaks. The 226, 206 and
286 all use the same chain assembly, while the
246 is supplied with a larger chain. All tools
come standard with enough chain to cut pipe
up to 6" nominal diameter, and with the addi-
tion of one chain extension can cut pipe up to
8" nominal diameter. All of the soil pipe cutters
use a unique hooking mechanism to make
hooking the chain easier.
Soil Pipe Cutter Safety
WARNING
Read and understand these instructions
and the warnings and instructions for
all equipment and material being used
before operating the Soil Pipe Cutters
to reduce the risk of serious personal
injury.
SAVE ALL WARNINGS
AND INSTRUCTIONS FOR
FUTURE REFERENCE!
Keep this manual with machine for use by
the operator.
•Keep bystanders out of work area while
cutting. Stand clear of the pipe. Cutting
can cause pieces of pipe to be thrown
with considerable force. This can cause
striking injuries, eye injuries, or other seri-
ous personal injury.
•Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce
personal injuries.
•Do not exceed the recommended cut-
ting capacity of the tool. Use the correct
tool for your application. Do not force
tool. Cutting pipe that is too large or the
wrong type could overload the soil pipe
cutter and cause tool failure and or serious
personal injury. Do not extend the chain to
cut soil pipe greater than 8" in diameter.
•Do not use handle extensions or power
tools to activate the soil pipe cutter.
Handle extensions (cheaters) can slip and
cause serious injury. Extended handles or
Product specificaties
| Merk: | RIDGID |
| Categorie: | Snijmachine |
| Model: | 246S |
Heb je hulp nodig?
Als je hulp nodig hebt met RIDGID 246S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine RIDGID
6 Juli 2023
6 Juli 2023
4 Juli 2023
3 Juli 2023
1 Juli 2023
1 Juli 2023
30 Juni 2023
27 Juni 2023
Handleiding Snijmachine
- Snijmachine Electrolux
- Snijmachine Bosch
- Snijmachine Grundig
- Snijmachine Kenwood
- Snijmachine Krups
- Snijmachine Quigg
- Snijmachine Siemens
- Snijmachine Tefal
- Snijmachine Unold
- Snijmachine Ade
- Snijmachine Ambiano
- Snijmachine Arendo
- Snijmachine Ariete
- Snijmachine Bartscher
- Snijmachine Beem
- Snijmachine Beper
- Snijmachine Berkel
- Snijmachine Bestron
- Snijmachine Bifinet
- Snijmachine Bifinett
- Snijmachine Blaupunkt
- Snijmachine Borner
- Snijmachine Brother
- Snijmachine Domo
- Snijmachine Domoclip
- Snijmachine Dremel
- Snijmachine Efbe-schott
- Snijmachine Emga
- Snijmachine Enkho
- Snijmachine Ernesto
- Snijmachine Esperanza
- Snijmachine ETA
- Snijmachine Exquisit
- Snijmachine Fagor
- Snijmachine Ferm
- Snijmachine Festool
- Snijmachine Fritel
- Snijmachine G3 Ferrari
- Snijmachine Gastroback
- Snijmachine Gastronoma
- Snijmachine Genius
- Snijmachine Gorenje
- Snijmachine Gourmetmaxx
- Snijmachine Graef
- Snijmachine Gude
- Snijmachine H.Koenig
- Snijmachine Hendi
- Snijmachine Hikoki
- Snijmachine Hyundai
- Snijmachine Ices
- Snijmachine Kalorik
- Snijmachine Kinzo
- Snijmachine Korona
- Snijmachine Livoo
- Snijmachine Mach
- Snijmachine Magic Chef
- Snijmachine Magimix
- Snijmachine Makita
- Snijmachine Melissa
- Snijmachine Mia
- Snijmachine MPM
- Snijmachine Parkside
- Snijmachine Philco
- Snijmachine Powerfix
- Snijmachine Powerplus
- Snijmachine PowerTec Kitchen
- Snijmachine Presto
- Snijmachine Primo
- Snijmachine Princess
- Snijmachine ProfiCook
- Snijmachine Proline
- Snijmachine Ritter
- Snijmachine Rommelsbacher
- Snijmachine Rotel
- Snijmachine Russell Hobbs
- Snijmachine Saro
- Snijmachine Saturn
- Snijmachine Sencor
- Snijmachine Severin
- Snijmachine Silvercrest
- Snijmachine Skil
- Snijmachine Sunbeam
- Snijmachine Team
- Snijmachine Trebs
- Snijmachine Tristar
- Snijmachine Turmix
- Snijmachine Ufesa
- Snijmachine Venga
- Snijmachine Waves
- Snijmachine Westfalia
- Snijmachine Zelmer
- Snijmachine Jata
- Snijmachine OK
- Snijmachine Oster
- Snijmachine OXO
- Snijmachine Clas Ohlson
- Snijmachine Black And Decker
- Snijmachine Clatronic
- Snijmachine Concept
- Snijmachine Cuisinart
- Snijmachine ECG
- Snijmachine Heinner
- Snijmachine Orbegozo
- Snijmachine Trisa
- Snijmachine Vox
- Snijmachine Wilfa
- Snijmachine Nutrichef
- Snijmachine Hobart
- Snijmachine Nevir
- Snijmachine Eldom
- Snijmachine JAC
- Snijmachine Coline
- Snijmachine Rösle
- Snijmachine Sammic
- Snijmachine Tescoma
- Snijmachine Riviera And Bar
- Snijmachine CaterChef
- Snijmachine RGV
- Snijmachine De Buyer
- Snijmachine Bron-Coucke
- Snijmachine FAC
- Snijmachine Avantco
- Snijmachine Makeblock
- Snijmachine Globe
- Snijmachine Baker's Mark
- Snijmachine Louis Tellier
- Snijmachine GARDE
- Snijmachine Pro-Cut
- Snijmachine Jokari
- Snijmachine Kleva
- Snijmachine Backyard Pro Butcher Series
- Snijmachine Prince Castle
- Snijmachine Boska
Nieuwste handleidingen voor Snijmachine
10 April 2024
10 April 2024
27 Maart 2024
27 Maart 2024
14 Maart 2024
13 Maart 2024
1 Maart 2024
24 Februari 2024
15 Februari 2024
30 Januari 2024