Revic BR4 Handleiding
Revic
Laserpointer
BR4
Bekijk gratis de handleiding van Revic BR4 (37 pagina’s), behorend tot de categorie Laserpointer. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.4 sterren uit 6.5 reviews. Heb je een vraag over Revic BR4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/37
3/11/24, 11:15 AM
br4-manual | Revic
https://www.revicoptics.com/br4-manual
7/44
Introducing the BR4
Congratulations on the purchase of your BR4 Ballistic Rangender! The Revic BR4 features our new Revic
solver with advanced wind and earth based effects to provide accurate, ultra-fast corrections in MOA, MILS,
or our exclusive Shoot-To-Range Mode for use with BDC turrets. The data rich display simplies the
shooting process and the improved ranging tools feature target discrimination and a new long range
mode. You can program your BR4 via a connected Bluetooth device, and with our Over The Air Update
protocols you will always have access to the latest software improvements.
Section 1 - Quick Start/Battery Installment
1. The BR4 Rangender is powered by a 3 Volt Lithium battery, commonly referred to as CR2. A new
battery comes factory installed with your new rangender. Please remove the insulator sheet in the battery
compartment before using it.
To install/reinstall:
a. Remove the battery compartment cover by lifting up the hinged tab and turning counter-
clockwise,
b. Insert the battery, negative end (-) rst.
c. Re-insert the battery compartment cover and use the hinged tab to turn clockwise.
d. Press down on the hinged tab to secure.
2. Pull the tab on the lens cover to expose the transmit and receive lenses and begin use.
3. Press and release the FIRE button to power ON the unit. Each time the unit is powered on, the unit is
3/11/24, 11:15 AM
br4-manual | Revic
https://www.revicoptics.com/br4-manual
8/44
ready to take a measurement.
4. Select a target, look through the eyepiece, and use the crosshair to aim at the target.
5. To acquire a range, press and hold the FIRE button until a range is acquired and displayed. The
horizontal and vertical reticle lines are displayed while the laser is active. Release the FIRE button once
the distance is displayed. If the distance is not displayed, release the FIRE button and repeat.
6. The Angle Modied Range (AMR or Horizontal Range) will display momentarily in the upper left
quadrant of the display, then ash to the Line-of-Sight (LOS) range.
Powering OFF the BR4
If no buttons are pressed for 20 seconds, the BR4 will enter sleep mode to conserve battery power. After
entering sleep mode, the BR4 will automatically power OFF in 60 seconds of no buttons being pressed. If a
Bluetooth connection was established, the BR4 will automatically power off 5 minutes after the last button
press. If the BR4 goes into sleep mode after a Bluetooth connection was established, you must reconnect
the BR4 to the device.
Figure 1: The new BR4 Rangender
Product specificaties
| Merk: | Revic |
| Categorie: | Laserpointer |
| Model: | BR4 |
Heb je hulp nodig?
Als je hulp nodig hebt met Revic BR4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Laserpointer Revic
30 Juli 2024
17 April 2024
17 April 2024
Handleiding Laserpointer
- Toolcraft
- Connect IT
- Bosch
- Skil
- Tacklife
- Perfect Choice
- Cameo
- Milwaukee
- Eurolite
- Steren
- Levenhuk
- Da-Lite
- Uni-T
- Picotronic
- Klip Xtreme
Nieuwste handleidingen voor Laserpointer
11 Augustus 2025
10 Augustus 2025
15 Juli 2025
14 Juli 2025
14 Juli 2025
14 Juli 2025
16 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025