Revel Performa3 C Stand Handleiding

Bekijk gratis de handleiding van Revel Performa3 C Stand (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 28 mensen en kreeg gemiddeld 4.0 sterren uit 9 reviews. Heb je een vraag over Revel Performa3 C Stand of wil je andere gebruikers van dit product iets vragen? Stel een vraag

NOTE: All of the parts shown in the following illustrations are supplied

with the M-Stands.

1. Attach the stand base to the stand riser as shown in the illustration below.

Large

Allen Wrench

Black M6 x 50mm

Fine-Thread Bolt

Washer

2. Spin the clamping rings onto the spikes and insert the spikes into the bases

as shown in the illustration below. You can install the spikes with either the

pointed end or rounded end protruding from the base.

Rounded end out

(wood or tile floors)

Pointed end out

(carpeted floors)

Spike and

Locking Ring

Washer

s)FTHESTANDSARETOBEPLACEDONACARPETEDmOORINSTALLTHESPIKESWITHTHE

pointed ends protruding from the stand base.

s)FTHESTANDSARETOBEPLACEDONAWOODORTILEmOORINSTALLTHESPIKESWITH

the round ends protruding from the stand base.

After determining the final locations for the speakers you can place coins under

THESPIKESTOPROTECTTHEmOORSURFACEFROMDAMAGE

NOTE: )FYOUWISHYOUCANINSTALLTHESPIKESWITHTHEPOINTEDENDS

PROTRUDINGFROMTHESTANDSFORPLACEMENTONWOODORTILEmOORS)NTHIS

case you must place coins or similar items under the spikes to avoid

DAMAGINGTHEmOORSURFACE

Rotate the locking ring clockwise to firmly secure the spike to the cabinet.

Make sure to thread the locking rings of all four spikes to achieve a level

BALANCEWHENTHESTANDISPLACEDRIGHTSIDEUPONTHEmOOR

3. Attach the stand top to the stand riser as shown in the illustration below.

Large

Allen Wrench

Black M6 x 30mm

Fine-Thread Bolt

Washer

4. Attach the speaker to the stand as shown in the illustration below. Only

Revel Performa3 M106 and M105 speakers can be attached to the M-Stand.

Use the VELCRO® strap on the rear of the stand for wire management.

Small

Allen Wrench

3/4" 1/4 x 20

Coarse-Thread Bolt

Washer

M Stand Assembly Instructions

Product specificaties