RetroSound WPA1 Handleiding

Bekijk gratis de handleiding van RetroSound WPA1 (2 pagina’s), behorend tot de categorie Tv-antenne. Deze gids werd als nuttig beoordeeld door 101 mensen en kreeg gemiddeld 4.1 sterren uit 7 reviews. Heb je een vraag over RetroSound WPA1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WPA1 Antenna

Installation

The WPA1 antenna is designed to mount inside your vehicle when you are not using

a traditional fender mount antenna.

1. Place the main body of the WPA1 as high in the dash as possible or using the

adhesive backing secure to the upper windshield or rear glass. Avoid placing it

near any high-current wiring.

Glass installation: Clean the mounting area with an alcohol wipe. Using a lint-free rag,

clean any residue off the window. Peel backing off the adhesive strip and press firmly to

the glass surface. Be careful not to press too hard on windshield applications.

2. Ground the WPA1 to a clean metal point close to its body with the small braided

cable and eyelet.

3. Route the antenna cable with the thin black power wire to your radio location.

Connect the thin black wire to a 12-volt ignition source or the blue power antenna

output wire of your RetroSound® radio.

4. Connect the male antenna plug into the female antenna receptacle of your radio.

www .com.retromanufacturing

Installation Guide

WPA1

Enhanced Amplied

Hide-away Antenna

Product specificaties