Reelcraft T-2462-0 Handleiding

Bekijk gratis de handleiding van Reelcraft T-2462-0 (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 9 reviews. Heb je een vraag over Reelcraft T-2462-0 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Operating Instructions

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Safe-T-Reel Welding Cable Reels

Model Numbers:

T-1460-0T-2462-0T-2464-0

Read this manual carefully

before installing, operating

or servicing this

equipment.

IMPORTANT

Four 1/2” diameter mounting holes

Dimensions

T-1460-0

A19”

B18”

C6”

D6”

E6 1/2”

F16 1/4”

A

B

E

C

D

• Ensure that only a qualified electrician installs/services this

equipment.

• Ensure that power supply voltage does not exceed maximum

voltage rating of reel.

• Ensure that reel is properly installed before connecting to power

supply.

• Ensure that all electrical power is removed from reel before ser-

vicing.

• Check for frayed/broken wires before each use.

• Pull electrical cord from reel by grasping the electrical cord

itself, not the work device.

• If an electrical malfunction should occur, remove power from reel

immediately.

• Ensure that reel, electrical cable, and equipment being serviced

are properly grounded. Use an ohmmeter to check ground

continuity.

• If reel ceases to unwind or rewind, remove power immediately.

Do not pull or jerk on electrical cable!

• Treat and respect the cable reel as any other piece of machinery,

observing all common safety practices.

WARNING:Even low voltage can cause irreparable damage or

death! Exercise extreme caution while operating or servicing this

equipment.

SAFETY

Injury and/or equipment damage may result if proper safety precau-

tions are not observed.

Form# 1105-801 Rev: 01/2023

T-2464-0

A38”

B18”

C6”

D6 1/2”

E16 1/4”

T-2462-0

A19”

B18”

C6”

D6 1/2”

E29”

Four 1/2” diameter mounting holesFour 1/2” diameter mounting holes

Product specificaties