Really Right Stuff BH-55 Handleiding

Bekijk gratis de handleiding van Really Right Stuff BH-55 (2 pagina’s), behorend tot de categorie Statief. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over Really Right Stuff BH-55 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

OPERATION

Attach the BH-55 to Tripod

1.

Tighten the Pan Lock Knob to lock the Panning Base with light to

medium torque.

2.

Screw the ballhead onto the 3/8”-16 threaded stud on the top of the

tripod (stud should not protrude more than 3/8” above platform or

5-6 threads). Tighten the ballhead onto the tripod snugly, but do not

over-torque or it will be diicult to remove.

Set Up Your Tripod

Set up your tripod to match the required camera position.

Orient the Ballhead

Loosen the Pan Lock Knob and rotate the body of the BH-55 ballhead as

shown, so you may operate the Main Lock Knob with your le hand while

your right hand is free to operate the camera controls. This orientation

allows you to easily tilt the camera body over from horizontal to vertical

using the drop notch.

1

2

Using the Drop Notch

1.

Loosen the Pan Lock Knob and rotate the body so one drop notch

is facing forward.

2. Fully seat camera into the drop notch.

Visit our website to see ballhead video tutorials.

® , ™, ©1990-2017 Really Right Stuff, LLC. All rights reserved.

As you adopt a procedure that works for you, it’s best to

practice that working mode consistently until it becomes

second nature. This will save you time in the field and help

avoid costly mistakes. Seasoned pros are able to setup

and shoot literally within seconds.

Adjust the Drag Set

Some photographers prefer to have tension (drag) on the ball

at all times to prevent the camera from suddenly flopping

when the Main Lock Knob is loosened. The optimal amount

of drag depends on the size and shape of equipment being

used as well as the angles at which you wish to place the

equipment (steeper angles require a higher drag setting).

To set the drag, either remove your camera or hold it in place.

1. Loosen the Main Lock Knob and Drag Set Knob by rotating them

in the opposite direction of the Arrow (counterclockwise).

2. Tighten the Main Lock Knob to your preferred amount of

resistance by turning in the same direction of the Arrow

and Lock symbol (clockwise).

3. Turn the Drag Set Knob in the direction of the Arrow

until it stops, then loosen the Main Lock Knob.

Your Drag is now set and will remain at the same

resistance until the Drag Set Knob is adjusted again.

Note: It is easy to forget that you set the drag and then

try to loosen the Main Lock Knob with no apparent

affect on the operation of the ball. If this happens to

you, please check the drag setting first and do not

over-loosen the Main Lock Knob.

Product specificaties