RCF TT08-A Handleiding

RCF Speaker TT08-A

Lees hieronder de 📖 handleiding in het Nederlandse voor RCF TT08-A (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
TT08-A
PRECISION MONITOR
“HIGH OUTPUT AT PREMIUM SOUND QUALITY”
We started the design of our TT+ compact speakers with a clear idea in
mind: maximum high quality audio SPL in the smallest weight and size.
Thanks to our state of the art neodymium transducers, premium quality
analog processing and powerful class D ampliers we reached and
surpassed our original goals.
IMPORTANT NOTES
Before connecting and using the amplier, please read this instruction manual carefully and keep it on hand for
future reference. The manual is to be considered an integral part of the product and must accompany the amplier
when it changes ownership as a reference for correct installation and use as well as for the safety precautions.
RCF Spa. will not assume any responsibility for the incorrect installation and/or use of the product. IANO
WARNING: To prevent the risk of re or electric shock, never expose this equipment to rain or humidity.
SAFETY PRECAUTIONS
1. All the precautions, in particular the safety ones, must be read with special attention, as they provide important
information.
2. The power supply voltage of this equipment is suiciently high to involve a risk of electrocution; therefore, never
install or connect the product with the power supply switched on.
3. Before powering up the amplier, make sure that all the connections have been made correctly and that the
voltage of your power mains corresponds to the voltage shown on the rating plate on the unit; if it does not, please
contact your RCF dealer.
4. The metallic parts of the unit are earthed by means of the power cable. In the event that the current outlet used
for power does not provide the earth connection, contact a qualied electrician to earth the equipment using the
dedicated termina l.
5. To protect the power cable from damage, make sure that it is positioned so that it cannot be stepped on or
crushed by objects.
6. To prevent the risk of electric shock, never open the amplier. There are no parts on the inside that the user
needs to access.
7. Make sure that no objects or liquids can get into the amplier, as this may cause a short circuit.
8. Never attempt to carry out any operations, modications, or repairs that are not expressly described in this
manual.
Contact your authorized service centre or qualied personnel should any of the following occur:
- the amplier does not function (or functions in an anomalous way);
- the power supply cable has been damaged;
- objects or liquids have got into the unit;
- the amplier has been subject to heavy impact.
9. When the amplier is not to be used for long periods of time, switch it o and disconnect the power cable.
10. If the amplier begins to emit any strange odours or smoke, switch it o immediately and disconnect the power
supply cable.
11. Do not connect this product to any equipment or accessories not specied.
For suspended installation, only use the dedicated anchoring points and do not try to hang this product using
HANDLES or elements that are unsuitable or not specic for this purpose.
Also check the suitability of the support surface to which the product is anchored (wall, ceiling, structure, etc.), and
the components used for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must
guarantee the security of the system/installation over time, also considering, for example, the mechanical vibrations
normally generated by the transducer.
To prevent the risk of falling equipment, do not stack multiple units of this product unless this possibility is specified
in the instruction manual.
12. RCF Spa. strongly recommends this product is installed by professional qualied installers (or specialised
rms) who can ensure correct installation and certify it according to the regulations in force.
The entire audio system must comply with the current standards and regulations regarding electrical systems.
13. Supports and trolleys
The equipment should only be used on trolleys or supports, where necessary, that are recommended by the
manufacturer. The equipment/support/trolley assembly must be moved with extreme caution. Sudden stops,
excessive pushing force and uneven oors may cause the assembly to overturn.
14. There are numerous mechanical and electrical factors to be considered when installing a professional audio
system (in addition to those which are strictly acoustic, such as sound pressure, angles of coverage, frequency
response, etc.).
15. Hearing loss
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level that leads to hearing
loss is dierent from person to person and depends on the duration of exposure. To prevent potentially dangerous
exposure to high levels of acoustic pressure, anyone who is exposed to these levels should use adequate
protection devices. When a transducer capable of producing high sound levels is being used, it is therefore
necessary to wear ear plugs or protective earphones.
See the technical specications in the instruction manual for the maximum sound pressure the loudspeaker is
capable of producing
IMPORTANT NOTES
To prevent the occurrence of noise on the cables that carry microphone signals or line signals (for example, 0 dB),
only use screened cables and avoid running them in the vicinity of:
- equipment that produces high-intensity electromagnetic fields (for example, high power transformers);
- mains cables;
- lines that supply loudspeakers.
OPERATING PRECAUTIONS
- Do not obstruct the ventilation grilles of the unit. Situate this product far from any heat sources and always
ensure adequate air circulation around the ventilation grilles.
- Do not overload this product for extended periods of time.
- Never force the control elements (keys, knobs, etc. ).
- Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external parts of this
product.

Product specificaties

Merk: RCF
Categorie: Speaker
Model: TT08-A

Heb je hulp nodig?

Als je hulp nodig hebt met RCF TT08-A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker RCF

RCF

RCF NX 945-A Handleiding

10 April 2024
RCF

RCF ART 935-A Handleiding

21 Juni 2023
RCF

RCF NXL 44-A MK2 Handleiding

21 Juni 2023
RCF

RCF P 3108 Handleiding

7 Juni 2023
RCF

RCF BS 8 Handleiding

2 Juni 2023
RCF

RCF ART 708-A MK4 Handleiding

1 Juni 2023
RCF

RCF MR 44WT Handleiding

27 Mei 2023
RCF

RCF EVOX JMIX8 Handleiding

27 Mei 2023
RCF

RCF ST 12-SMA Handleiding

20 Mei 2023
RCF

RCF DP 4 Handleiding

15 Mei 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024