Ransomes Highway 3 Handleiding

Ransomes Grasmaaier Highway 3

Lees hieronder de 📖 handleiding in het Nederlandse voor Ransomes Highway 3 (198 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/198
RJL 100 July 2015
Safety, Operation & Maintenance Manual
Veiligheids-, bedienings- en onderhoudsinstructies
Ransomes Highway 3 Ride on Reel Mower - Kubota V1105
Ransomes Highway 3 zelfrijdende haspelmaaier - Kubota V1105
Highway 3 - 4 Wheel Drive / 4-wielaandrijving
Series / Serie: GF
Product code / Productcode: LGEA340
Highway 3 - 2 Wheel Drive / 2-wielaandrijving
Series / Serie: GU
Product code / Productcode: LGEA320
WARNING
WARNING: If incorrectly used this machine can cause severe injury.
Those who use and maintain this machine must be trained in its
proper use, warned of its dangers and must read the entire manual
before attempting to set up, operate, adjust or service the machine.
WAARSCHUWING
WAARSCHUWING: Bij onjuist gebruik kan deze machine
ernstig letsel veroorzaken. Degenen, die deze machine
gebruiken en onderhouden, moeten getraind zijn in de juiste
bediening, gewezen zijn op de gevaren en dienen de gehele
bedieningshandleiding te hebben gelezen, alvorens pogingen
te ondernemen de machine in te stellen, te bedienen, af te
stellen of onderhoud aan de machine te plegen.
24881G-NL (Rev.3)
NL
Netherlands
1 CONTENTS
© 2015 Ransomes Jacobsen Limited. All Rights Reserved
INTRODUCTION
Important .................................................................................................. 1
Product Identification ................................................................................ 2
Guidelines For The Disposal Of Scrap Products ...................................... 4
During Service Life ................................................................................... 4
End Of Service Life .................................................................................. 4
Parts Manual ............................................................................................ 5
Key Numbers ............................................................................................ 6
SAFETY
How To Operate Safely ............................................................................. 7
Safe Operation ......................................................................................... 7
Preparation ............................................................................................... 7
Operation .................................................................................................. 8
ROPS ....................................................................................................... 9
Safe Handling Of Fuels ............................................................................ 9
Maintenance And Storage ........................................................................ 9
When You Put The Mower On A Trailer .................................................. 10
Important Safety Notes ............................................................................ 11
Notes ....................................................................................................... 14
SPECIFICATION
Engine Specification ................................................................................ 15
Dimensions & Weights ............................................................................ 16
Machine Specification ............................................................................. 18
Vibration Level ......................................................................................... 18
Noise Testing .......................................................................................... 19
Slopes ..................................................................................................... 19
Cutting Unit Specification ......................................................................... 20
Cutting Performance ............................................................................... 20
Recommended Lubricants ...................................................................... 20
Accessories ............................................................................................. 20
Air Suspension Seat Kit ........................................................................... 20
Certificates Of Conformity ........................................................................ 20
Notes ....................................................................................................... 25
DECALS
Safety Decals EC .................................................................................... 26
Instruction Decals EC .............................................................................. 28
CONTROLS
Operator Workstation .............................................................................. 30
Instrument Panel ..................................................................................... 31
Starter Key Switch ................................................................................... 32
Throttle Control Lever .............................................................................. 32
Parking Brakes ........................................................................................ 32
Hazard Warning Switch ........................................................................... 33
Cutting Unit Switch (PTO) ....................................................................... 33
Backlap Switch ........................................................................................ 33
4 Wheel Drive In Reverse Switch ............................................................ 33
Visual Display .......................................................................................... 34
Start Up Screen ....................................................................................... 34
Warning/service Screen .......................................................................... 35
Start Up Slope Warning Screen ............................................................... 35
Main Run Screen ..................................................................................... 36
Water Temperature Screen ..................................................................... 37
Blocked Charge Filter Screen ................................................................. 37
Slope Warning Screens............................................................................ 38
Main Menu ............................................................................................... 39
Clock & Date Adjust ................................................................................ 39
Service Menu .......................................................................................... 40
Data logging Menu .................................................................................. 41
Language Menu ...................................................................................... 41
Right Hand Unit Lift/lower Switch ............................................................ 42
Centre Unit Lift/lower Switch ................................................................... 42
Left Hand Unit Lift/lower Switch .............................................................. 43
Indicator Lamps ....................................................................................... 43
Weight Transfer Button ........................................................................... 43
Traction Pedal ......................................................................................... 44
Steering Tilt Control ................................................................................. 44
Horn ......................................................................................................... 45
Power Outlet ............................................................................................ 45
Reel Speed Control ................................................................................. 45
Parking Brake Release Valve .................................................................. 46
Free Wheel .............................................................................................. 46
Lighting Kit (Optional) .............................................................................. 47
Seat Right Hand Arm Rest & Pod ........................................................... 47
OPERATION
Daily Inspection ....................................................................................... 48
Operator Presence And Safety Interlock System .................................... 49
Operating Procedure ............................................................................... 50
Fitting The Cutting Unit To The Machine ................................................. 51
Operation Of The Machine ...................................................................... 52
Starting The Engine ................................................................................. 52
Driving ..................................................................................................... 52
Mowing .................................................................................................... 53
To Stop The Engine ................................................................................ 53
Unblocking Cutting Units ......................................................................... 53
Backlapping ............................................................................................. 54
Procedure ................................................................................................ 55
Transporting ............................................................................................ 55
Transporting On A Trailer Or Flat bed ..................................................... 56
Mowing On Slopes .................................................................................. 57
Slope Calculation Chart ........................................................................... 59
MAINTENANCE AND LUBRICATION
Maintenance & Lubrication Chart ............................................................ 60
Engine Lubrication ................................................................................... 62
Engine: Fan Belt ...................................................................................... 63
Engine Coolant ........................................................................................ 64
Hydraulic System .................................................................................... 65
Hydraulic Test Ports ................................................................................ 66
Fuel System ............................................................................................ 67
Air Cleaner .............................................................................................. 68
Battery ..................................................................................................... 68
Machine Maintenance ............................................................................. 69
Lubrication Of Cutting Unit ....................................................................... 70
ADJUSTMENT
Traction Control Pedal ............................................................................. 72
Weight Transfer Adjustment .................................................................... 72
Cutting Unit Height Of Cut Adjustment .................................................... 73
Floating Head Front Roll Setting .............................................................. 73
Cutting Cylinder To Bottom Blade Adjustment ........................................ 74
Cutting Cylinder Bearings ........................................................................ 75
Front And Rear Roll Bearings ................................................................. 75
Grass Deflector ....................................................................................... 75
General Instructions For Grammer Seats ............................................... 76
Seat (Grammer Msg85) ........................................................................... 77
Air Suspension Seat (Grammer Msg75 -521) ......................................... 78
Weight Adjustment .................................................................................. 78
Fore/aft Adjustment ................................................................................. 78
Backrest Extension .................................................................................. 79
Seat Heater .............................................................................................. 79
Lumbar Support ....................................................................................... 79
Armrests ................................................................................................... 80
Armrest Adjustment.................................................................................. 80
Backrest Adjustment ............................................................................... 80
Maintenance ............................................................................................ 81
ACCESSORIES
Rotary Beacon Kit ................................................................................... 82
Light Kit ................................................................................................... 82
Mirror Kit .................................................................................................. 83
Storage Racks ......................................................................................... 83
Notes ....................................................................................................... 84
PROBLEM SOLVING
Troubleshooting General ......................................................................... 85
QUALITY OF CUT
Quality Of Cut Troubleshooting ............................................................... 86
Washboarding ......................................................................................... 86
Marcelling ................................................................................................ 87
Step Cutting ............................................................................................. 88
Scalping ................................................................................................... 89
Stragglers ................................................................................................ 90
Streaks ..................................................................................................... 91
Windrowing .............................................................................................. 92
Rifling Or Tramlining ................................................................................ 93
Mismatched Cutting Units ....................................................................... 93
FUSES AND RELAYS
Fuse And Relay Identification................................................................... 94
GUARANTEE
Warranty .................................................................................................. 96
service ..................................................................................................... 96
SECTION PAGE SECTION PAGE
en-1
INTRODUCTION 2
2.1 IMPORTANT __________________________________________________________
The Ransomes Highway3 is a Diesel engined self propelled Rotary mower. The hydraulic systems are for the
traction drive, the cutting unit lift and the lower and cutting unit drives and steering.
IMPORTANT: Do the maintenance indicated in this manual to make sure that the quality of cut is kept at a high
level.
This SAFETY AND OPERATORS MANUAL is part of the machine and must stay with the machine always.
Suppliers of both original and used machines need to keep the documentation that comes with the machine.
You must use the machine to cut the grass only and not for any other purpose. Compliance with the conditions of
operation, service and repair specified by the manufacturer, are understood to be part of the correct use.
ALL operators MUST read through this manual and understand the Safety Instructions, controls, lubrication and
maintenance procedures.
Make sure that you obey all safety and road traffic regulations.
You must not make any changes to the machine that the manufacturer does not approve. This type of change
can release the manufacturer from the liability for any damage or injury.
Discard worn parts, taking note of the environmental result, use the systems available in the country where the
machine is used. When the machine is at its end of life, there are guidelines in this manual for the removal of the
machine from use.
Use only Ransomes Jacobsen Genuine spare parts to make sure that European conformity is controlled.
2006/42/EC
These instructions are the Original instructions confirmed by Ransomes Jacobsen Limited


Product specificaties

Merk: Ransomes
Categorie: Grasmaaier
Model: Highway 3

Heb je hulp nodig?

Als je hulp nodig hebt met Ransomes Highway 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grasmaaier Ransomes

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier