Rane FT 45 Handleiding

Bekijk de handleiding van Rane FT 45 gratis online of download de PDF. Deze handleiding is 20 keer bekeken. Vraag over dit model? Stel een vraag

FT 45

CROSSFADER

10024

2. Remove the four screws securing the

cover plate (see Figure 1) with a #1

3. Carefully remove cover plate.

4. Remove the two mounting screws (shown

in Figure 2) with a #1 screwdriver,

while holding the fader in place.

5. Slide fader to one side and bring through

hole in panel.

6. Remove ribbon cable from the fader

Fader Removal

supplied with the replacement

5. Install the four new mounting screws

with the replacement fader. (see

2. Feed replacement fader through hole.

1. Plug ribbon cable onto fader assembly.

3. While holding fader in place, install

Fader Installation

the two mounting screws supplied

Phillips screwdriver.

assembly.

fader. (see Figure 1).

4. Carefully place the cover plate back

onto unit.

Figure 2)

1. Remove the three fader knobs by

gently pulling up.

6. Place the three knobs back onto the

faders.

Figure 1

102401

Figure 2

TTM 54 PERFORMANCE MIXER

Beoordeel deze handleiding

Product specificaties

Als je hulp nodig hebt met Rane FT 45 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden