RadioShack PRO-2067- 500 Channel Handleiding

RadioShack Scanner PRO-2067- 500 Channel

Lees hieronder de đź“– handleiding in het Nederlandse voor RadioShack PRO-2067- 500 Channel (56 pagina's) in de categorie Scanner. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56
Owner’s Manual Cat. No. 20-196
PRO-2067 500-Channel
Mobile Trunk-Tracking Scanner
Please read before using this equipment.
A
20-196a.fm Page 1 Friday, June 2, 2000 3:48 PM
2
INTRODUCTION
Your new RadioShack 500-Channel
Mobile Trunk-Tracking Scanner is one
of a new generation of scanners de-
signed to track Motorola Type I,
Type II (such as Smartnet and Priva-
cy Plus), GE/Ericsson EDACS, E.F.
Johnson LTR, and hybrid analog
trunking systems, which are exten-
sively used in many 800 MHz, 900
MHz and UHF communication sys-
tems.
Trunking communications systems let
a large group of 2-way radio users (or
even different groups of 2-way radio
users) efficiently use a group of fre-
quencies. Instead of selecting a spe-
cific frequency for a transmission, the
2-way radio user simply selects a talk
group. The trunking system automati-
cally transmits the call on the first
available frequency, and also sends a
code that uniquely identifies that 2-
way radio user’s transmission on a dif-
ferent frequency called a data chan-
nel.
Since the trunking system might send
individual 2-way radio user’s calls and
response transmissions on different
frequencies, it is difficult to listen to
trunked communications using a regu-
lar scanner. The scanner monitors the
data channel frequency sent with a 2-
way radio user’s transmission and in-
stantly switches to an active frequen-
cy, so you can hear the call and
response for that 2-way radio user
and easily “follow” the conversation.
The scanner also lets you scan con-
ventional transmissions, and is pre-
programmed with service-search
banks for convenience. By pressing a
single button, you can quickly search
those frequencies most commonly
used by public service and other
agencies without tedious and compli-
cated programming.
This scanner gives you direct access
to over 33,000 frequencies, including
those used by police and fire depart-
ments, ambulance services, and ama-
teur radio services, and you can
change your selection at any time.
FEATURES
Your scanner also has these special
features:
Ten Channel-Storage Banks — let
you store 50 channels in each bank
(500 total channels), letting you group
channels so you can more easily iden-
tify calls.
Flexible Operation — you can track
Motorola, GE/Ericsson, and E.F.
Johnson LTR trunking systems (used
by most trunking communications sys-
tems), letting you hear more calls than
many standard trunking scanners.
© 2000 RadioShack Corporation.
All Rights Reserved.
RadioShack, RadioShack.com, HyperSearch, and HyperScan are trademarks
used by RadioShack Corporation.
20-196a.fm Page 2 Friday, June 2, 2000 3:48 PM
3
Simultaneous Trunking Operation
— you can scan all 3 types of trunking
systems, and both trunking and con-
ventional frequencies, at the same
time.
Text Input — you can manually enter
the name of the service you are listen-
ing to so the service name appears
when you scan it, making it easier to
identify transmissions.
Digital Weather Alert — displays the
weather event text so you can see the
reason for the alert.
Note: The scanner does not display
the actual location referenced by
SAME messages. It uses only the
message portion of the SAME signal.
Ten Preprogrammed Frequency
Ranges
— let you search for trans-
missions within preset frequency
ranges or within ranges you set, to re-
duce search time and select interest-
ing frequencies more quickly.
Private/Digital Private Line Receiv-
ing — decodes and displays the Con-
tinuous Tone Coded Squelch System
(CTCSS) and Digital Coded Squelch
(DCS) tone signal being transmitted,
letting you see if the transmitter pro-
vides these services.
12-Character, 4-Line, Dot-Matrix
Display
— makes it easy to view and
change displayed information.
Frequency Coverage to 960 MHz —
provides a wide range of frequencies
you can listen to.
Clone/Remote PC Function — lets
you transfer programmed data directly
to another Cat. No. 20-196 or Cat. No.
20-522 scanner. You can also upload
or download the programmed data to
or from a PC using an optional inter-
face kit.
Triple-Conversion Circuitry — virtu-
ally eliminates any interference from
IF (intermediate frequency) images,
so you hear only the selected frequen-
cy.
Scan Delay — delays scanning for
about 2 seconds before moving to an-
other channel, so you can hear more
replies that are made on the same
channel.
Lock-Out Function — lets you set
your scanner to skip over specified
channels or frequencies when scan-
ning or searching, and skip over IDs
when tracking trunked systems.
Priority Channel — lets you program
one channel as the priority channel.
As the scanner scans it checks the pri-
ority channel every 2 seconds so you
don't miss transmissions on that chan-
nel.
ATT (Attenuate) Button — lets you
program each memory location to re-
duce the scanner’s sensitivity to
strong local signals, to reduce interfer-
ence or noise caused by these sig-
nals.
20-196a.fm Page 3 Friday, June 2, 2000 3:48 PM


Product specificaties

Merk: RadioShack
Categorie: Scanner
Model: PRO-2067- 500 Channel

Heb je hulp nodig?

Als je hulp nodig hebt met RadioShack PRO-2067- 500 Channel stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Scanner RadioShack

Handleiding Scanner

Nieuwste handleidingen voor Scanner