Radioddity GC-5 Handleiding

Bekijk gratis de handleiding van Radioddity GC-5 (2 pagina’s), behorend tot de categorie Walkie talkie. Deze gids werd als nuttig beoordeeld door 28 mensen en kreeg gemiddeld 4.9 sterren uit 5 reviews. Heb je een vraag over Radioddity GC-5 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Radioddity GC-5 Manual Programming Steps

To enter a channel from the front panel, the steps below should help:

The Menu(Green) key is used to invoke the Menu system, Enter the selection part of an option, and

Confirm that option.

The Back (Red) key is used to exit a Menu option (or it will automatically return after a short delay)

Once the repeater Receive frequency is entered via the VFO Mode and using the Keypad, the Menu

options will help you set the other parameters.

Example:

2m Repeater

146.685 Receive frequency

The offset is .6 MHz

Shift Direction is - (minus)

Transmit CTCSS Tone is 100 Hz

Receive CTCSS Tone is 100 Hz

Enter VFO (Frequency) Mode using VFO/MR key.

Use the Keypad to enter 145685 (the Decimal Point and extra 2 Zeros will be added automatically)

Press Menu, Option 2 TX power

Press Menu to Select

Use Up/Down Arrows as needed to select the Power setting

Press Menu to Confirm

Exit to Return (or scroll to the next Option)

Press Menu, then 1 2 to set TX CTCSS tone

Press Menu to Select

Use Up/Down Arrow as needed to scroll to 100.0 Hz, or press the first 3 digits (1 0 0), scroll to 100.0

Hz

Press Menu to Confirm

Exit to Return (or scroll to the next Option)

Press Menu, then 1 0 to set RX CTCSS tone

Press Menu to Select

Use Up/Down Arrow as needed to scroll to 100.0 Hz, or press the first 3 digits (1 0 0), Scroll to 100.0

Hz

Press Menu to Confirm

Exit to Return (or scroll to the next Option)

Press Menu, then 2 8 to set Shift Direction

Press Menu to Select

Use Up/Down Arrows as needed to scroll to Minus

Product specificaties