Radial Engineering X-AMP Handleiding
Bekijk gratis de handleiding van Radial Engineering X-AMP (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 47 mensen en kreeg gemiddeld 5.0 sterren uit 24 reviews. Heb je een vraag over Radial Engineering X-AMP of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/16
•AMP
XX
XX
X
Radial Engineering
1638 Kebet Way, Port Coquitlam BC V3C 5W9
tel: 604-942-1001 fax: 604-942-1010 email: info@radialeng.com
Radial Amp Driver
User Guide
www.radialeng.com
Radial Engineering is a division of C•TEC (JP CableTek Electronics Ltd.)
1
Radial is a division of JP Cabletek Electronics Ltd.
Specifications and appearence subject to change without notice.
Radial X-Amp manual V1.0 - Part #: R800-9646-00
www.radialeng.com
Radial X-Amp Owners Manual
Table of Contents:
Caution statement, please read before using.........
Introduction - What is the X-Amp?..........................
Input panel...............................................................
Output panel............................................................
Using the X-amp......................................................
Grounding options...................................................
FAQs.......................................................................
Specifications..........................................................
History of Re-amping...............................................
Warranty ................................................................
Welcome!
The Radial X-amp is an active re-amplifying device that has
been developed with one goal in mind: To explore new
musical sounds and spur on the creative process.
Like all Radial products, this ‘creative tool’ is made using the
very finest components and care to ensure the very highest
quality sound possible. And like any tool, the best way to get
the most out of it is by understanding the functions, the intent
behind the design and of course some of the safety features
and instructions that have been provided. To this end, we
recommend reading this manual before operating your X-Amp.
We are confident you will find the Radial X-amp to be fun to
use, musical and that it will open new doors to creativity.
Should you have any questions regarding its functions, or
wish to explore new areas that are not covered in this
manual, we invite you to contact us at info@radialeng.com.
We love to hear from you!
Page
True to the Music
X•AMP User GuideRadial Engineering
2
3
5
6
7
10
10
11
12
back cover
Please read before connecting your
Radial X-Amp
Caution must be used when connecting electronic equipment
to the X-AMP. The X-AMP bridges all electronic equipment
connected to it so faulty wiring or incorrect grounding of any
of the equipment may cause a shock hazard to be present
and/or damage to the X-AMP or other connected equipment.
Because grounding schemes differ between manufacturers,
it is important to check for correct polarity, in particular with
older amplifiers using 2-prong ungrounded A/C cords. If the
polarity is reversed on an ungrounded amplifier there may be
a potential of 120V present between the amp chassis and
ground. Radial Engineering takes no responsibility for this or
how the X-AMP is connected or used. It is the user’s full
responsibility to ensure that proper electrical polarity is
maintained on all equipment connected to the X-AMP and that
proper building electrical codes have been followed
wherever the X-AMP is being used.
To reduce opportunity for shock hazard or damage to the X-
AMP or connected equipment, plug the ¼” connectors into the
amplifiers first and then into the X-AMP. This is especially
important when using old amplifiers that do not have 3-prong
plugs as the possibility exists to touch the chassis ground
with the connector plug tip when the plug is inserted into the
jack.
Cautions for amplifiers with ungrounded 2-prong A/C cords:
Before connecting any input to an ungrounded amplifier,
power the amp up and listen to the residual hum. If the amp
has a two-position ground polarity reverse switch, set the
switch in the position that produces the least residual hum
from the speakers. If there is no polarity switch, reverse the
A/C plug at the outlet to find the least residual hum.
To ensure an ungrounded amplifier does not present a shock
hazard:
Test for voltage potential by connecting a voltmeter between
the amplifier chassis and the X-AMP chassis. If voltage is
present, reverse the amplifier’s A/C supply polarity and test
again. Note that due to this potential problem, damage to
the X-AMP or other connected equipment caused by
improper A/C polarity is not covered under warranty.
2
True to the Music
X•AMP User GuideRadial Engineering
Product specificaties
| Merk: | Radial Engineering |
| Categorie: | Niet gecategoriseerd |
| Model: | X-AMP |
Heb je hulp nodig?
Als je hulp nodig hebt met Radial Engineering X-AMP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Radial Engineering
2 April 2025
25 Februari 2025
25 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
Handleiding Niet gecategoriseerd
- Hisense
- Ergodyne
- Bushnell
- Match
- Amfra
- Hauck
- AvMap
- Nicols
- Zoetis
- Portech
- Juki
- Tivoli Audio
- Noveen
- Ledlenser
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025