Quoizel PCSM8532C Handleiding

Bekijk gratis de handleiding van Quoizel PCSM8532C (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 71 mensen en kreeg gemiddeld 5.0 sterren uit 9 reviews. Heb je een vraag over Quoizel PCSM8532C of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Please go tofor product cleaning tips. Go to theselection.

Integrated 24W LED

: Lutron DVELV-300P or Lutron SELV-300P.

www.quoizel.comCare+ Maintenance

Light Source:

Compatible Dimmer Switches

Tools Required:Flatheadscrewdriver, Phillipsscrewdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.

Estimated AssemblyTime:

Preparation:

20-30 minutes

Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are

present. Ifany partsare missingor damaged, donotattempt toassemble, install, oroperate the fixture. Contact customer service for replacement

parts.

1of2

Assembly Instruction Sheet #IS-PCSM8532C_R1

For Style PCSM8532C

Package Contents

B

Mounting

Screw

x 2

Inner

Backplate

x 1

A

C

Fixture

Body

x 1

EGlass B

x 1

G

Shade

Holder

x 2

STEP 2Install Inner Backplate and Fixture Body-

A. Passthe supplywires throughInnerBackplate (A).AttachInner

Backplate (A) to Outlet Box with the head of Green Ground Screw

facing you. Secure it with Outlet Box Screws (not included). Tighten

until snug

B. Race allsupply wiresthrough the Inner Backplate (A)asshown.

Refer to Step 3 for wiring connections.

C.Attach Fixture Body (C) over Inner Backplate (A) andsecure with

Lock Screws (B). Tighten until snug with screwdrivers.

.

A

Figure 2

Outlet Box

OutletBox Screw

(not supplied)

B

STEP 4InstallGlass to Fixture Body-

A. InsertGlass(E/D) into the Shade Holder (G)properly.

B. Tighten LockScrews(F) onbothside ofthe fixturebody andhand

tighten until snug.

Your fixture is now assembled and ready to use. Enjoy!

F

Lock

Screw

x 4

DGlass A

x 1

STEP 1Install Shadeto

Fixture Body

-Holder

Do NOT

A. Place Shade Holder(G) overthe side

ofthe Fixture Body (C), line upthe hole

onthe Shade Holder (G) and the

mountinghole onthe Fixture Body (C),

secure by threadingLock Screw (F)

intothe mounting hole.tighten

at this moment.

F

C

G

Figure 1

C

D

E

G

STEP3-Wire Connections

A. Wrap bare or green ground wire around green ground screw on the

crossbar, nolessthan 2inchesfromthe endofthe wire. Tightenthe

green ground screw.

B. Use standardwire connectors(not included)tomake allwire

connections. Twistconnectorsuntilwiresare tightly joined together.

Wrap each connection with approved electrical tape and carefully

stuffallthe connectedwiresinto the OutletBox.

Figure 3

Green Ground Screw

onthe Crossbar

White wire

fromoutlet boxWhite wire

from fixture

Black wire from

outlet box (or Red)

Black wire

from fixture

Bare, orGreen

Ground wire

fromoutlet box

Ground wire

from Fixture

F

Warnings and Cautions

Turn offelectricity at circuit breaker or main fuse box before installation. Consult a licensed electrician ifin doubt.

These instructionsare providedforyoursafety. It isvery importantyoureadthemcompletely before installingthe fixture. We strongly

recommendthatalicensed, professionalelectricianperformthe installation.

Disconnect fixture frompowersource before replacingbulbs. Make sure bulbsare givensufficienttime to coolbefore removal.

2017 QuoizelInc.RevisedDate:2017-12-15

Thank youfor purchasinga Quoizelproduct.

Need assistancewithpartsor assembly?Call Quoizelcustomer serviceat 1-800-645-3184

orvisitus on-lineat www.quoizel.com

Product specificaties