Quantum VS2124 Handleiding

Quantum Bewakingscamera VS2124

Lees hieronder de 📖 handleiding in het Nederlandse voor Quantum VS2124 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Hardware Overview
For front and rear views of the system, descriptions of the components, and explanations
of what the various LEDs indicate, refer to Operate > Hardware Overview.
VS2124 QUICK START
The Quantum VS2124 is an efficient, flexible platform designed for video surveillance
applications. It enables you to efficiently record and store surveillance footage and run an entire
security infrastructure on a single cloud like platform. For complete documentation, refer to the -
VS2124 Documentation Center (www.quantum.com/VS2124docs).
Activate your warranty and register your product with Quantum: www.quantum.com/startup
Installing the VS2124
Step 2 Prepare for the installation.
Page 1
Front
Bezel Removed and Internal Drives Shown
All Drives Ship Installed
Rear
Step 1 Choose a location that meets the requirements.
A summary of the steps is below. For details, refer to Install > VS2124 Installation.
Step 3 Unpack the VS2124.
Step 4 Install the VS2124 system in the rack.
Step 5 Install the cable management arm.
Step 6 Connect the power cords and power on.
Control Panel
Power Button
Reset Button
Status LEDs
Safety Information: See Resources > VS2124 Safety Information
Location on Front of Chassis
Operating and Maintaining the VS2124
6-68737-01 Rev E ©2019 Quantum Corporation. All rights reserved.
Page 2
*6 01*- -68737
Display IP Addresses
For instructions on how to use the VMS-Info icon to display your system’s
existing IP address settings, refer to Operate > Display IP Addresses.
Locate the System Serial Number
For details on locating the system serial number and chassis part number, refer to Operate > Locate
the System Serial Number. You will need this if you contact Quantum Technical Support or order a
replacement part.
Generate Data Collect Logs
For details on using the VMS-Collect icon or the VMS-Settings Menu to create a zip file that contains
the diagnostic logs for all of the system components, refer to Operate > Generate Data Collect Logs.
Step 7 Perform the initial configuration.
Step 8 Identify Network Connections and Configure
CameraNet Interfaces.
Configuring the VS2124
Step 9 Install the video surveillance software.
Location on Rear of Chassis
Video Surveillance Console

Product specificaties

Merk: Quantum
Categorie: Bewakingscamera
Model: VS2124

Heb je hulp nodig?

Als je hulp nodig hebt met Quantum VS2124 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Quantum

Quantum

Quantum VS2124 Handleiding

15 Augustus 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Aqara

Aqara Camera Hub G2H Handleiding

28 April 2024
Iiquu

Iiquu Dummy Dome Camera Handleiding

28 April 2024
Sony

Sony SNC-VB640 Handleiding

26 April 2024
Sony

Sony SNC-EB642R Handleiding

26 April 2024
Sony

Sony SNC-VB642D Handleiding

26 April 2024
Sony

Sony SRG-HD1 Handleiding

26 April 2024
Sony

Sony SNC-ZM550 Handleiding

26 April 2024
Sony

Sony SNC-EM642R Handleiding

26 April 2024
Sony

Sony SNC-EM641 Handleiding

26 April 2024
Sony

Sony SNC-ZB550 Handleiding

26 April 2024