QTX QR10PA Handleiding

QTX Speaker QR10PA

Lees hieronder de đź“– handleiding in het Nederlandse voor QTX QR10PA (5 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
QR10PA
Portable PA
Item ref: 178.840 UK
User Manual
Version 1 2.
Caution: Please read this manual carefully before operati ng
Damage caused by misuse is not covered by the warranty
178.840 User Manual UK
Introduction
Thank you for choosing the QR10PA portable PA unit. Please read this manual prior to use to avoid damage to the item.
This versatile portable PA unit is packed with features in a compact, manageable enclosure and is suitable for a wide
array of applications ranging from public address for presentations to outdoor karaoke.
• 15Vdc power adapter with IEC input
• Internal 12V rechargeable battery
• VHF neckband microphone included
• Guitar / rophone inputs (6.3mm jack) Mic
• Master 2 band EQ and Echo effect for microphones
• Internal USB/SD/FM media player with record function
• VCV mic override function
• Wireless remote control for media player
• Integral trolley with telescopic handle
• Integral 35mm pole mount
• AUX line input
Please check the contents to ensure that the product has been received in good condition.
• QR10PA portable PA unit
• Neckband microphone
• VHF beltpack transmitter
• 15Vdc power adaptor and IEC mains lead
• IR Remote control for media player
• User manual
If you find any accessory is missing or the product has arrived with any problems, please contact your retailer at once.
This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself as this will
invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible
replacement or returned demand.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To vent electric shock do pre
not remove the cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
Prior to connecting mains adapter, ensure that the supply voltage is correct and the mains lead is in good condition.
Avoid ingress of water or particles into the enclosure.
If the internal fuse blows, refer the unit to qualified service personnel
If the VHF microphone is to be unused for a long period of time, remove the battery and store for later use.
Placement
Keep e unit out of direct sunlight and away from heat sources. th
Place the unit in an upright position during use and storage.
Keep the unit away from moisture or dusty environments.
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls.
To avoid damage, do not use solvents to clean this equipment.
178.840 User Manual UK
Control panel
Powering up
Your new QR10PA portable PA unit may arrive with you with the internal battery charged. Before connecting to the mains
with the supplied power adaptor, switch the unit on and check the POWER LED. If it is green, there is charge in the
battery. If it is red, then you will need to charge the battery before using away from a mains power supply.
Connect the QR PA unit to the mains using the supplied power adaptor. You may otherwise opt to connect the DC 10
input jack to an external 12- Vdc supply, such as a car battery, or use the internal battery if charged. 15
When not in use but connected to the mains, if the POWER switch is in the
off
position, the internal battery will be re-
charged from the mains supply. This can be observed by the CHARGE LED which will light orange when charging. When
fully charged, the CHARGE LED will change to green.
Note: it is recommended to store the PA unit at an ambient temperature and not with the battery fully discharged.
Initial setup
Turn all VOLUME & ECHO controls down (anti-clockwise) and turn the POWER switch on (the power LED should light).
BASS and TREBLE (5, 16) controls should remain pointing vertically (12-o-clock position). Turn up the main VOLUME
control (14) part way and switch VCV ( ) off. Your QR10PA unit should now be ready to operate. 15
VHF Neckband Microphone
Connect the neckband microphone to the bodypack via the 3.5mm jack, slide open the bodypack and insert the supplied
AA batteries observing the correct polarity. With the VHF WIRELESS MICROPHONE VOL (6) control turned down, press ,
the VHF ON/OFF button 7) in so that the VHF POWER LED (18) lights. (1
Switch on the beltpack transmitter fully (2 clicks as the centre position is “MUTE”) – the RF LED should light as a result.
Turn up the volume control on the beltpack fully this can be turned down later if required If the LED on the transmitter –.
lights dimly, change the battery.
Gradually increase VHF VOL control, testing the neckband microphone for output through the speake r.
Take care not to incur “feedback” (howling or screeching sound through the speaker) by keeping the microphone a
sensible distance from the speaker and pointing away from the speaker so that it doesn’t
hear
the speaker output.
Turning the ECHO control (3) clockwise introduces a pre-set echo function for singing and special effects. BASS and
TREBLE (5, 16) can be cut by turning anti-clockwise or boosted by turning clockwise.
When not in use, switch the beltpack transmitter off and remove the batteries if not being used for long periods.
1
USB port
2
SD/MMC card slot
3
ECHO level
4
Wired MIC volume
5
TREBLE EQ
6
VHF Mic volume
7
LINE IN 2 x RCA
8
Wired MIC.2 input 6.3mm jack
9
Wired MIC.1 / guitar input 6.3mm jack
10
Smart phone / aux input stereo 3.5mm jack
11
MIX OUT line output 2 x RCA
12
Media player LCD display & IR receiver
13
Media player mode & transport controls
14
Main volume
15
VCV talkover on/off
16
BASS EQ
17
VHF wireless receiver on/off
18
VHF wireless receiver power & RF signal LEDs
19
Battery charge & power LEDs
20
Power on/off
21
DC power input jack

Product specificaties

Merk: QTX
Categorie: Speaker
Model: QR10PA

Heb je hulp nodig?

Als je hulp nodig hebt met QTX QR10PA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker QTX

QTX

QTX QUEST-12A Handleiding

9 Juli 2023
QTX

QTX QUEST-10A Handleiding

7 Juli 2023
QTX

QTX PartyPod Handleiding

27 April 2023
QTX

QTX QR12K Handleiding

10 April 2023
QTX

QTX QR15K Handleiding

2 April 2023
QTX

QTX QR15PA Handleiding

30 Maart 2023
QTX

QTX QR5B Handleiding

27 Maart 2023
QTX

QTX QX12A Handleiding

21 Maart 2023
QTX

QTX QX12PA+ Handleiding

18 Maart 2023
QTX

QTX QR10PABT Handleiding

16 Maart 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024