QTX BC5A Handleiding

QTX Hifi systeem BC5A

Lees hieronder de 📖 handleiding in het Nederlandse voor QTX BC5A (14 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
BC5A / BC6A
ACTIVE STEREO SPEAKER SET
Order ref: 170.164UK, 170.165 , 170.166UK, 170.168UK, 170.169UK UK
User Manual
ï‚· Active + satellite stereo pair
ï‚· Supplied with adjustable wall brackets
ï‚· Supplied with satellite link cable
ï‚· RCA or 3.5mm stereo inputs
BC5A BC6A User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the BC-series active speaker set. Please read this manual prior to use to avoid
damage to the item. These compact, self-contained stereo speaker sets are designed to deliver high quality
near-field or perimeter coverage for various monitoring and installed sound applications
Contents
Please take care when unpacking this product. Inspect for any damage and ensure you have the following
components…
ï‚· BC-series active speaker with built-in amplifier
ï‚· BC-series passive satellite speaker
ï‚· 2 x wall-mounting brackets with screw caps
 Satellite speaker wire modular connector –
ï‚· Mains lead(s)
Safety Conventions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent electric shock do not remove the rear cover.
No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
ï‚· Prior to connecting the dc adaptor to mains, ensure that the supply voltage is correct.
ï‚· Avoid ingress of water or particles into the enclosure.
Placement
ï‚· Keep the unit out of direct sunlight and away from heat sources.
ï‚· Keep the unit away from moisture or dusty environments.
ï‚· Allow adequate space for cooling at the rear of the active speaker unit
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. Do not use solvents.
BC5A BC6A User Manual
Panel layout
(example shown is BC5A)
Setting up
For near-field or desktop use, space speakers apart for adequate stereo separation depending on
proximity to the listener. For installations using the supplied wall-mount brackets, attach the brackets
to a solid surface using fixings which are sufficient to hold the weight of the active speaker. Take
care to mount the active unit close enough to a mains outlet for the supplied adaptor to reach.
Fix the speaker units to the brackets at top and bottom using the supplied screw caps. Each can be
rotated to aim the general direction of sound output.
If the speakers are mounted at height or where falling objects may be hazardous, it is advised to
attach a secondary means of support (e.g. drop-wire or chain)
Operation
Link the powered speaker to the satellite using the supplied modular connector speaker lead (5)
With the rotary VOLUME (4) control set to minimum and TREBLE and BASS controls set to the
vertical (12 o’clock) position, connect the supplied mains lead to the rear of the active unit (2) and
plug into a suitable mains outlet. Connect the source signal into the active unit via either L+R RCA
connectors or 3.5mm stereo jack input (8, 9) Switch the power on (3) and gradually turn the rotary .
VOLUME control clockwise and increase volume level to the required amount.
The stereo/mono switch (6) offers mono output for both speakers if required. Stereo is default.
Adjust TREBLE (7) and BASS (10) controls to provide the desired tonal response.
The centre position is unaffected, to the left is cut and to the right is boost.
Turn down rotary VOLUME control before switching off.
1
Fuse holder
2
Mains inlet (Fig.8 BC5A, IEC BC6A)
3
Power on/off switch
4
Rotary VOLUME control
5
Satellite speaker output
6
Stereo/mono switch
7
Rotary TREBLE tone control
8
3.5mm stereo line input
9
L+R RCA line input
10
Rotary BASS tone control

Product specificaties

Merk: QTX
Categorie: Hifi systeem
Model: BC5A

Heb je hulp nodig?

Als je hulp nodig hebt met QTX BC5A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Hifi systeem QTX

QTX

QTX BC5A Handleiding

3 December 2022
QTX

QTX KAD-2BT Handleiding

26 November 2022

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Philips

Philips DTM3170 Handleiding

30 April 2024
Philips

Philips MC-120 Handleiding

26 April 2024
Panasonic

Panasonic SC-AK630 Handleiding

22 April 2024
Philips

Philips FW-C355 Handleiding

15 April 2024
Sony

Sony DHC-MD373 Handleiding

15 April 2024
Philips

Philips BTB2570 Handleiding

15 April 2024
Thomson

Thomson DS121CD Handleiding

13 April 2024
Thomson

Thomson DS122CD Handleiding

13 April 2024
Panasonic

Panasonic RX-D15 Handleiding

11 April 2024
RCF

RCF NDX595 Handleiding

10 April 2024