QSC Q-SYS NV-32-H Handleiding

QSC Niet gecategoriseerd Q-SYS NV-32-H

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC Q-SYS NV-32-H (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
TD-001543-01-C
*TD-001543-01*
™
Hardware User Manual
Q-SYS NV-32-H (Core Capable) Network Video Endpoint for the Q-SYS Ecosystem
2
TD-001543-01-C
EXPLANATION OF TERMS AND SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in
damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.
The term "NOTE" is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"
voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and
maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
Refer to Safety Information and Regulatory Statements Q-SYS NV-32-H (Core Capable) 4K60 Network Video for important
information.
Warranty
For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com
What's in the Box
(1x)
Q-SYS NV-32-H (Core Capable)
(1x)
Power
2-POS
5.08 Pitch
(2x)
GPIO
5-POS
3.5Pitch
(1x)
Foam Spacer
(2x)
Rack-Ear
Cover Label
1/4, 1RU
(1x)
Rack-Ear
Cover Label
(2x)
Joining
Plate
(2x)
Rack Spacer
Plate
(2x)
Rack Ear
1/4,1RU
(1x)
Rack Ear
(6x)
Phillips Pan Head
M4x7mm
(6x)
Phillips Flathead
M3x6mm
(1x)
Q-SYS NV-32-H (Core Capable)
Safety Instructions
TD-001542
(1x)
QSC Warranty
TD-000453
3
TD-001543-01-C
Introduction
The Q-SYS NV-32-H (Core Capable) can operate in two modes.
In peripheral mode, the device functions as a network video endpoint native to the Q-SYS Ecosystem, serving as a multi-stream configurable HDMI
encoder or decoder enabling network based video distribution. The endpoint uses Q-SYS Shift, which delivers the right balance of high quality
(supporting resolutions up to 4K60 4:4:4), low latency and network efficient distribution across a standard gigabit infrastructure.
In Core Mode, the device functions as a Q-SYS Core Audio and Control processor with an integrated HDMI video switch. In this mode users can run
the product as they would any other Core, but will not be able to encode or decode streams.
Powering the Q-SYS NV-32-H (Core Capable)
WARNING!: To avoid risk of electric shock, this equipment must only be connected to a supply mains
with protective earth when using class I power supply.
The Q-SYS NV-32-H (Core Capable) has a flexible power solution that allows the integrator to choose to use either a 48 VDC power supply
or a 802.3bt type 4 PoE++ injector. Please note that 802.3bt type 4 is a high-power over Ethernet standard that allows for up to 71W of
power delivered to end-point devices over standard Ethernet cabling. Equipment meeting the 802.3bt type 4 standard is required to power the
Q-SYS NV-32-H (Core Capable). The Q-SYS NV-32-H (Core Capable) will not work using PoE or PoE+ (802.3af or 802.3at) equipment.
With either power solution please make sure to follow the safety instructions for the specific power supply or injector chosen. For details on the
48 VDC or PoE++ power supply requirements please see the product specifications at the end of this document.
Installation
Ventilation
Minimum open space of 6 inches measured from the back of the
Q-SYS NV-32-H (Core Capable).
NOTE: In order to provide adequate dissipation of
heat, keep the space directly to the rear of the
Q-SYS NV-32-H (Core Capable)
free of obstacles.
Select the Installation Configuration
Choose one of the following configuration options:
A. One Q-SYS NV-32-H (Core Capable) 19-inch Rack (Left
or Right Mount)
B. One Q-SYS NV-32-H (Core Capable) 19-inch Rack
(Center Mount)
C. Two Q-SYS NV-32-H (Core Capable)'s 19-inch Rack
D. One Q-SYS NV-32-H (Core Capable) Half Rack
E. Under Table or on Wall

Product specificaties

Merk: QSC
Categorie: Niet gecategoriseerd
Model: Q-SYS NV-32-H

Heb je hulp nodig?

Als je hulp nodig hebt met QSC Q-SYS NV-32-H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd QSC

QSC

QSC QIO-S4 Handleiding

27 Mei 2023
QSC

QSC Core 510i Handleiding

25 Mei 2023
QSC

QSC CXD4.3Q Handleiding

14 Mei 2023
QSC

QSC DPA-8K8Q Handleiding

13 Mei 2023
QSC

QSC Attero Tech unBT2A Handleiding

10 Mei 2023
QSC

QSC USL JSD-100 Handleiding

9 Mei 2023
QSC

QSC DPA 4.2 Handleiding

9 Mei 2023
QSC

QSC CX-Q 8K4 Handleiding

5 Mei 2023
QSC

QSC Q-SYS NV-32-H Handleiding

4 Mei 2023
QSC

QSC Core Nano Handleiding

15 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024