QSC DPA-4K8Q Handleiding

QSC Niet gecategoriseerd DPA-4K8Q

Lees hieronder de šŸ“– handleiding in het Nederlandse voor QSC DPA-4K8Q (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 127 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
TD-001585-01-B
*TD-001585-01*
DPA-Q & DPA-Qī˜Ÿ
Q-SYS Network Amplifiers
User Manual
DPA 2K4Q ā€” 4 Channel, 2000 W Network Ampliļ¬er with Mic/Line Inputs
DPA 4K4Q ā€” 4 Channel, 4000 W Network Ampliļ¬er with Mic/Line Inputs
DPA 8K4Q ā€” 4 Channel, 8000 W Network Ampliļ¬er with Mic/Line Inputs
DPA 4K8Q ā€” 8 Channel, 4000 W Network Ampliļ¬er with Mic/Line Inputs
DPA 8K8Q ā€” 8 Channel, 8000 W Network Ampliļ¬er with Mic/Line Inputs
DPA 2K4Qn ā€” 4 Channel, 2000 W Network Ampliļ¬er
DPA 4K4Qn ā€” 4 Channel, 4000 W Network Ampliļ¬er
DPA 8K4Qn ā€” 4 Channel, 8000 W Network Ampliļ¬er
DPA 4K8Qn ā€” 8 Channel, 4000 W Network Ampliļ¬er
DPA 8K8Qn ā€” 8 Channel, 8000 W Network Ampliļ¬er
Ā®
2
TD-001585-01-B
EXPLANATION OF SYMBOLS
The term indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury ā€œWARNING!ā€
or death.
The term indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it ā€œCAUTION!ā€
may result in damage to the equipment that may not be covered under the warranty.
The term ā€œIMPORTANT!ā€ indicates instructions or information that are vital to the successful completion of theī˜Ÿprocedure.
The term is used to indicate additional useful information."NOTE"
The intent of the lightning ļ¬‚ash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"
voltage within the product's enclosure that may be of sufļ¬cient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and
operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Elevated Operating Ambient ā€“ If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the
rack environment may be greater than room ambient. Consideration should be given to ensure that the maximum operating
temperature range -10Ā°C to 50Ā°C (14Ā°F to 122Ā°F ) is not exceeded. Reduced Air Flow ā€“ Installation of the equipment in a
rack should be such that the amount of air ļ¬‚ow required for safe operation of the equipment is not compromised.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing connection.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not ļ¬t into your outlet, consult an electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from theī˜Ÿapparatus.
12. Only use attachments/accessories speciļ¬ed by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualiļ¬ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
15. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable after installation.
16. Adhere to all applicable, local codes.
17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
18. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus. Clean only with a dry cloth.
19. Do not unplug the unit by pulling on the cord, use the plug.
20. Do not submerge the apparatus in water or liquids.
21. Keep ventilation opening free of dust or other matter.
3
TD-001585-01-B
Maintenance and Repair
WARNING! Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially
adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons
and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only
by a QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury,
harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.
In the event of malfunction, contact QSC Customer Support for assistance.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCCī˜ŸRules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
ā€¢ Reorient or relocate the receiving antenna.
ā€¢ Increase the separation between the equipment and receiver.
ā€¢ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
ā€¢ Consult the dealer or an experienced radio/TV technician for help.
Environmental
Life cycle 10 years / Storage temperature -20 Ā° C to + 70 Ā° C / Relative humidity 5 - 85% RH
Service life - 10 years. Storage conditions: temperature from -20 Ā° C to + 70 Ā° C, humidity 5% - 85%.
If you wish to discard electronic equipment, please contact your dealer or supplier for further information.

Product specificaties

Merk: QSC
Categorie: Niet gecategoriseerd
Model: DPA-4K8Q

Heb je hulp nodig?

Als je hulp nodig hebt met QSC DPA-4K8Q stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd QSC

QSC

QSC QIO-S4 Handleiding

27 Mei 2023
QSC

QSC Core 510i Handleiding

25 Mei 2023
QSC

QSC CXD4.3Q Handleiding

14 Mei 2023
QSC

QSC DPA-8K8Q Handleiding

13 Mei 2023
QSC

QSC Attero Tech unBT2A Handleiding

10 Mei 2023
QSC

QSC USL JSD-100 Handleiding

9 Mei 2023
QSC

QSC DPA 4.2 Handleiding

9 Mei 2023
QSC

QSC CX-Q 8K4 Handleiding

5 Mei 2023
QSC

QSC Q-SYS NV-32-H Handleiding

4 Mei 2023
QSC

QSC Core Nano Handleiding

15 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024
Sony

Sony PDW-U4 Handleiding

26 April 2024
Sony

Sony NXL-FR318 Handleiding

26 April 2024