QSC AD-S5T Handleiding

QSC Speaker AD-S5T

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC AD-S5T (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Acoustic Design™ seRies
Quick Start Guide
AD-S5T
TD-001618-00-A
*TD-001618-00*
— Figure 1 —–
— Figure 2 —–
Set the Transformer Tap Switch
See Table 1 and Figures 1 and 2.
AD-S5T
100 Volt 70 Volt
8 8 Ω Ω
N/A 60W
60W 30W
30W 15W
15W 7.5W
Table 1 —
2
TD-001618-00-A
Install the X-Mount™ Bracket
WARNING!:
Install the system in accordance with local
building codes and regulations. Use a licensed contractor
or professional engineer. QSC is not responsible for
damages resulting from the negligent installation of any
bracket or loudspeaker.
See Figure 3.
Mount to a surface capable of supporting the weight of theloudspeaker.
Adjust the Angle of the Bracket
See Figure 4.
NOTE:
This step may be done now or after mounting the
loudspeaker. — Figure 3 —–
PAN TILT
+15º-30º
5 mm
— Figure 4 —–
Security Tab
1
2
Safety Ring
— Figure 5 —–
Mount the Loudspeaker on the
X-Mount™ Bracket
See Figure 5.
WARNING!:
The X-Mount supplied with the AD-S5T
is specifically designed for the working load of the
loudspeaker. These mounts are not interchangeable
among models. Only use the X-Mount supplied with
yourloudspeaker.
Pan Tilt Yaw
+/- 75º +15º, -30º N/A
3TD-001618-00-A
Wire the Loudspeaker
See Figure 6.
— Figure 6 —–
Warranty
For a copy of the QSC Limited Warranty, visit the QSC, LLC website at
www.qsc.com
Parallel Wiring Diagram
Amp
To more
speakers
From
Source
To Additional
Loudspeakers
1


Product specificaties

Merk: QSC
Categorie: Speaker
Model: AD-S5T

Heb je hulp nodig?

Als je hulp nodig hebt met QSC AD-S5T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker QSC

Handleiding Speaker

Nieuwste handleidingen voor Speaker