QSC AcousticCoverage AC-S4T Handleiding
Bekijk gratis de handleiding van QSC AcousticCoverage AC-S4T (4 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 52 mensen en kreeg gemiddeld 4.5 sterren uit 26.5 reviews. Heb je een vraag over QSC AcousticCoverage AC-S4T of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4

AC-S4T
User Manual
TD-000490-00
TD-000490-00

TD-000490-00
EXPLANATION OF SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in damage to the equipment that may not be covered under the CAUTION!
warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.
The term " " is used to indicate additional useful information.NOTE
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous" voltage within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within a triangle is to alert the user to the presence of important safety, and operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Refer all servicing to qualified service personnel.
• Adhere to all applicable, local codes.
• Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
Warranty
For a copy of the QSC Limited Warranty, visit the QSC Audio Products website at www.qsc.com
Para una copia de la Garantía Limitada de QSC, visite el sitio web de QSC Audio Products, en www.qsc.com
Pour obtenir une copie de la garantie limitée de QSC, visitez le site de QSC Audio Products à www.qsc.com
Besuchen Sie die Webseite von QSC Audio Products (www.qsc.com) um eine Kopie der beschränkten Garantie von QSC zu erhalten.
如果您想要 有限保修的複印本,请造访 音频产品的网站QSC QSC www.qsc.com
Для получения копии ограниченной гарантии QSC посетите веб-сайт QSC Audio Products, расположенный по адресу www.qsc.com.
www.qsc.com QSC
QSC

TD-000490-00
Set the Transformer Tap Switch
Refer to Figure 1.
1. Use a flat-tip screwdriver to set the transformer tap based on the requirements of the
installation. To bypass the transformer for direct low impedance applications, set the tap
selector to THRU.
Install the Yoke Bracket and Mount the Loudspeaker
Refer to Figure 2.
1. Secure the yoke bracket to structure capable of supporting the weight of the loudspeaker.
2. Align the rubber washer between the loudspeaker and yoke mounting holes and join using
the thumb screw.
Wire the Loudspeaker
Refer to Figure 3.
1. Land the speaker supply wire to the Euroblock connector as indicated.
2. For additional loudspeakers, use the thru output from the previous loudspeaker as the supply.
3. Install the Euroblock connector to the loudspeaker.
100V
16
THRU
THRU
70V
100V
16
4
1
4
2
8
2
16
8
WARNING!: Install the system in accordance with local building codes
and regulations. Use a licensed contractor or professional engineer.
QSC Audio Products is not responsible for damages resulting from the
negligent installation of any bracket or loudspeaker.
— Figure 1 —
— Table 1 —
— Figure 2 —
— Figure 3 —
100 Volt 70 Volt
8 8 Ω Ω
N/A 16W
16W 8W
8W 4W
4W 2W
2W 1W
Parallel Wiring Diagram
Amp
To Additional
Loudspeakers
Input
Speaker #1 Speaker #2 Speaker #3
Thru Input Thru Input Thru
166 mm
[6.5 in] 150 mm
[5.9 in]
230 mm
[9.1 in]
160 mm
[6.3 in]
Specifications:
System Details AC-S4T
Effective frequency range 170 Hz – 20 kHz
Rated noise power / voltage216 watts / 11.3 volts (rms)
Broad-band sensitivity385 dB SPL
Coverage angle (-6 dB) 130° conical (500 Hz - 5 kHz)
Directivity factor (Q) 6
Directivity Index 8 dB
Maximum continuous SPL497 dB
Maximum peak SPL4103 dB
Rated impedance 8 ohms
Recommended amplifier 32 watts
Transformer taps 70 V: 16, 8, 4, 2, 1 watts
100V: 16, 8, 4, 2 watts
8 ohm bypass
LF transducer 100 mm [4 in] Polypropylene woofer
25 mm [1 in] voice-coil
HF transducer 25 mm [1 in] Aluminium dome tweeter
25 mm [1 in] voice-coil
Input connector type Euroblock connector with parallel output
Enclosure material UV treated, high impact ABS polymer
Grille material Powder coated steel
Yoke material Powder coated steel, brass inserts
Enclosure Details
Ingress protection IP-44
Operating environment Designed for indoor use
Operating Temperature Range -20 to 50° C [-4 to 122° F]
Net weight 2.4 kg [5.3 lb]
Product dimensions 230 x 160 x 150 mm [9.1 x 6.3 x 5.9 in]
Shipping weight 5.3 kg [11.8 lb] (pair packed)
Shipping dimensions 292 x 206 x 368 mm [11.5 x 8.1 x 14.5 in] (pair packed)
Included accessories Yoke mount system, euroblock connector
1
Free-field, -10 dB from on-axis sensitivity
2
IEC60268-1 noise signal for 2 hours
3
On-Axis, free-field sensitivity, 2.83V, 1 m
4
Calculated from rated noise voltage and sensitivity
Product specificaties
Merk: | QSC |
Categorie: | Speaker |
Model: | AcousticCoverage AC-S4T |
Kleur van het product: | Wit |
Gewicht: | 2400 g |
Breedte: | 160 mm |
Diepte: | 150 mm |
Hoogte: | 230 mm |
Gewicht verpakking: | 5300 g |
Breedte verpakking: | 206 mm |
Diepte verpakking: | 368 mm |
Hoogte verpakking: | 292 mm |
Bluetooth: | Nee |
Type verpakking: | Doos |
Connectiviteitstechnologie: | Bedraad |
Gemiddeld vermogen: | 16 W |
Aanbevolen gebruik: | Thuis |
Impedantie: | 8 Ohm |
Audio-uitgangskanalen: | - kanalen |
Speaker plaatsing: | Vloer |
Aantal drivers: | 2 |
Woofer: | Ja |
Diameter driver: | 114 mm |
Frequentiebereik: | 70 - 20000 Hz |
Gevoeligheid: | 85 dB |
Signaal/ruis-verhouding: | 103 dB |
Luidspreker soort: | 2-weg |
Diameter woofer: | 25 mm |
Aantal woofer drivers: | 1 |
Diameter hogetonenluidspreker: | 25 mm |
Aantal tweeter drivers: | 1 |
Tweeter: | Ja |
Bedrijfstemperatuur (T-T): | -20 - 50 °C |
Heb je hulp nodig?
Als je hulp nodig hebt met QSC AcousticCoverage AC-S4T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker QSC
28 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
21 Februari 2025
21 Februari 2025
30 Januari 2025
29 Januari 2025
Handleiding Speaker
- Atlas Sound
- IMG Stage Line
- Audio-Technica
- Chord
- Micromega
- AmpliVox
- Amphion
- GeekLJT
- Alfatron
- DataVideo
- Leitz
- Aperion
- Potter
- Elbe
- Micro Innovations
Nieuwste handleidingen voor Speaker
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025