Pyramid Time Systems 9D26BRCT Handleiding

Bekijk gratis de handleiding van Pyramid Time Systems 9D26BRCT (4 pagina’s), behorend tot de categorie Campingvogn. Deze gids werd als nuttig beoordeeld door 48 mensen en kreeg gemiddeld 5.0 sterren uit 8 reviews. Heb je een vraag over Pyramid Time Systems 9D26BRCT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

TIMETR NC COUNT UP/COUNTDOWN AXSY™

DIGITAL TIMER CONTROLLER

ModelCTPLATEBUZ/CBPLATEBUZ Instrtio s ucns

888726.479.4

pamiesystem.com yrdtim

I22 Rev. C 64

OVERVIEW

The Timr Sync Count Up/Down or Code Blue ControllereTax™is used in conjunction with a TimeTrax Sync™ Digital

Timer (sold separately) to monitor elapsed or remaining time during critical events, educational testing/instruction,

manufacturing processes, lab testing, recreational activities, seminars, transportation depot applications, broadcasting and

other time-sensitive events. Features include a Start/Pause button to start or stop counting function. A built-in buzzer

signals the user when timer reaches zero in countdown mode.

Use Count Up/Countdown or Code Blue Controller with any of the following TimeTrax Sync™Digital Timermodels:

9D26BRCT, S9D2R6CALS, S9D4R6CALB, S9D2B6CALB, S9D2R6CAUB, S9D4R6CAUB, S9D2B6CAUB, S9D4B6CAUB.

TimeTrax Sync™ Digital Timersmay also be used in conjunction with aTimeTrax Sync™ RF Wireless Transmitterto

receive accurate, official time signal.

Connect RJ45 cable into port located in compartment on back of Controller switch plate.

Route the RJ45 cable through standard single gang electrical box (not included). Pull cable through wall

cavity and out to digital timer installation location.

Plug other end of RJ45 cable into port located in compartment on back of TimeTrax Sync™ Digital

Tim er(sold separately). The Controller switch plate is able to control more than one Digital Timer.*

Wire TimeTrax Sync™ Digital Timer according to installation instructions.

CAUTION:110V CLOCK WIRING SHOU BE COMPT P ELECTRICAL LDLEEDERCODE AND PRM BY A LICENSED ELECTRIAN.ERFOEDCI

Before mounting controller switch plate to electrical box, push the buzzer volume test button located on

the back of switch plate in the top right hand corner.

To increase buzzer volume, turn blue volume control button clockwise using a flathead screwdriver. To

decrease buzzer volume or deactivate buzzer, turn blue volume button counter clockwise.

To enable “pulsating” buzzer sound, remove jumper from J2 and install jumper on J1.

Mount Controller switch plate to electrical box using two screws provided.

*Use RJ45 Y-Splitter (part no 41270) to daisy chain more than one digital timer.

INSTALLATION

Product specificaties