Pyle PVTTBT6OR Handleiding

Pyle Platenspeler PVTTBT6OR

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PVTTBT6OR (8 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

PVTTBT8

Retro Belt Drive Bluetooth Turntable with -

USB- -to PC Connection

TURNTABLE PARTS

1. Tone Arm

2. Speakers

3. Tone Arm Rest

4. Function Selection Knob

5. Power/Volume Control Switch

6. Power Led Light Indicator

7. BT Led light indicator

8. Internal Battery Charging Led light Indicator

9. Speaker Buckles

10. Turntable Player Lock

11. Handle

12. Stylus/cartridge

13. Turntable platter

14. Speaker Cable

15. 3.5mm line in Jack-

16. RCA output Jack

17. USB Jack to PC for recording

18. Speed Selection Switch

19. Power Adaptor Jack

POWER ON THE UNIT

Connect the power adaptor to an electrical outlet (120V-60Hz); Or make sure that the

rechargeable battery has been fully charged. Then, turn the Power/Volume Control knob

clockwise to switch on the unit. The Power led light indicator will light up(6).

CHARGING INTERNAL BATTERY

Once connected to the power adaptor, the internal battery is atomatically charging, the red led

light indicator(8) will light red. Once fully charged, the charging led light indicator(8) will turn off.

PLAY A RECORD

1. Open the suitcase by unlock the 3 buckles(9, 10)

2. Turn the function selection knob (4) to Phono mode

3. Place a record on the turntable (1 ) 3 and set the player speed to match the record speed ( ) 18

(33/45). NOTE: when playing a single (a 45 rpm record) and/or records with large centre

holes, use the 45 rpm adaptor (packed together ). with the instruction manual

4. Remove the tone arm from the rest (1) (3), push lift lever backward to raise the tone arm and

gently move the tone arm to the desired position over the record. The turntable will begin to

spin when the tone arm is above record. S onto the desired position on the lowly lower

record to begin playing the record.

5. Turn the volume control(5) to adjust the volume level.

6. For best performance and product maintenance, unplug the turntable when not in use.

PLAY BLUETOOTH

7. Turn the function selection knob (4) to BT m The BT light indicatorode. (7) will flash with Blue

led light.

8. Open the BT audio source and connect with “Speaker”. Once connected, the BT light

indicator will flash only in blue color.

9. Control the BT audio source to select songs and volume for playback.

LINE IN

10. Turn the function selection knob (4) to LINE IN mode. Connect the 3.5mm line- 5in jack (1 )

which is located at the rear of the unit. Connect the other end of the aux cable (not included)

to your aux source.

11. Control the Line in audio source to select songs and volume for playback.-

Product specificaties

Merk:	Pyle
Categorie:	Platenspeler
Model:	PVTTBT6OR
Kleur van het product:	Oranje
Gewicht:	3833 g
Soort:	Draaitafel met riemaandrijving
Aantal USB-aansluitingen:	1
USB-versie:	2.0
AUX ingang:	Ja
Nominale snelheid:	33, 45, 78 RPM
Productafmetingen (B x H x D):	355.59 x 274.32 x 132.07 mm
Cd-speler:	Nee
Line outputs (RCA):	2