Pyle PSTNDW15 Handleiding

Pyle luidsprekersteun PSTNDW15

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PSTNDW15 (3 pagina's) in de categorie luidsprekersteun. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

PSTNDW15

Adjustable Wall Mount Speaker Bracket

User's Manual

www.pyleaudio.com

Thank you for purchasing Pyle's PSTNDW15 Universal Wall Mount

Speaker Bracket.

Specifications:

At upright 90° position, you can mount At 30° tilt down position, you can mount

a 22” deep speaker cabinet. a 30” deep speaker cabinet.

Adjustable tilt feature allows you to mount a 30” speaker cabinet

• Distance From Wall: 12.5"

• Weight Capacity: 80 lbs.

• Tilt Angle Adjustment: 90°-30°

• Swivel Angle Adjustment: ±30°

• Standard 1 3/8" insert fits most speaker cabinets

• Added solid-steel pin serves as a safety- stop

• Construction: Steel

Installation Instructions:

• Required Tools: socket or hand wrench, drill,

drill bit, stud finder, pencil, level, tape

measure, (4) 3/8” x 4” lag bolts

Step #1: Remove brackets from box.

Step #2: Check for stud location

with a stud finder and place speaker bracket in

desired location.

Step #3: Test that the bracket plate is level

and mark the hole locations on the wall using

the holes from bracket backer plate as a

template.

Step #4: Drill proper mounting hole (smaller

than outer thread diameter of your lag bolts)

through wall into wood studs or concrete

block. Hole depth should be properly drilled so

that your lag bolt can go through the sheet

rock and 2” into the stud.

Step #5:

Place speaker bracket on wall and

install 3/8” lag bolts (recommended) in the

upper location. Securing tightly until the head

of the lag bolt is firmly against the bracket.

Repeat for bottom location.

Step #6: Before placing the speaker cabinet

on the bracket, test installation by confirming

the bracket will hold the weight of your

speaker. If desired, tilt the angle of the bracket

downward to the desired angle and tighten the

bolts to lock in place.

Step #7: Place the speaker on the cabinet by inserting the vertical sleeve into the

speaker cabinet’s internal adapter. Be sure the speaker is secure before releasing it.

Test installation with speaker in vertical and tilted positions to be sure the bracket stays

firmly against the wall.

Product specificaties

Merk:	Pyle
Categorie:	luidsprekersteun
Model:	PSTNDW15
Kleur van het product:	Zwart
Gewicht:	1945 g
Plaatsing:	Muur
Draaihoek:	30 °
Bereik kantelhoek:	90 - 30 °
Afstand tot de muur (max.):	317.5 mm