Pyle PLCM4350WIR Handleiding

Pyle Fotocamera PLCM4350WIR

Lees hieronder de đź“– handleiding in het Nederlandse voor Pyle PLCM4350WIR (5 pagina's) in de categorie Fotocamera. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
WARNING: Failure to read and follow these warnings and instructions may result in serious injury, including damaged
property, so please pay close attention and exhibit the utmost care.
• The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving conditions,
obstructions, ou, the driver, must and large stationary objects. Y also remember to drive safely and properly. Use of the
Digital Backup Camera is not a substitute for safe, proper and legal driving practices.
• Never back up while looking only at your connected monito screen. You should always check behind and around r display
the vehicle when backing up just as you would if the vehicle did not have the Digital Backup Camera. Always make sure
your driving area is clear. Always back up slowly and with caution.
• Never depend on the Backup Camera entirely when backing up. The image on the screen monitor display may be slightly
different from actual and real conditions. Objects viewed in the rear view monitor differ from actual distance -time s
because a wide sed. -angle lens is u So use the camera as an aid and always follow intended driving practices to properly
judge distances from objects.
• The Backup Camera's assisted low lux lighting performance feature is also an aid to a driver. Always use your own eyes
to confirm the vehicle’s surroundings, as the displayed image may be not well lit or not entirely visible. Always proceed
with caution and perform double before proceeding. -checks
• The area displayed by the Backup Camera is limited. It does not display objects that are close to or below the just
bumper, underneath the vehicle, or objects out of the camera’s view. The camera's view can change according to your
vehicle's orientation on the road or changing road conditions.
• Be sure to check the camera is properly functioning, is properly positioned securely ed and mount , every time you
operate your vehicle.
• Make sure operates correctly, as intended, before and after installationyour trunk hatch or .
• Avoid excess water exposure around the camera Proceed with caution when cleaning your vehicle around the camera.
especially with spraying or a power washer.
• Please make sure to keep the camera clean and unobstructed from any debris
• Follow all traffic laws and motor vehicle regulations.
• Consult local laws and regulations for any restrictions on installation or use.
• Using a Backup Camera System is not adequate enough to completely eliminate a vehicle’s blind spot. Always remember
to drive with caution, following all traffic laws.
Please read all of the installation instructions carefully before installing the product. Improper installation will void
manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as
guidelines to assist in installing the system. Please consult an experienced technician if you are not comfortable
installing the product. Prior to using and installing the Backup Camera System, please read the safety information
provided in this user manual. Be sure to use the product as outlined in this user manual. Altercation or modifications
carried out without appropriate authorization may invalidate the user's right to operate the equipment.
System Installation and Wiring
Notes:
Camera System installation on different types of vehicles require slightly different wiring install These installation may s.
instructions do not apply to all types of vehicles. They are meant only as a general guide due to the large number of
vehicle makes and models. Consult your local motor vehicle laws, and installation professional, on the use of this product
to be sure it is permitted, and for optimum performance operation.
Through installation of this backup camera system, you should be sure as to not degrade, damage or compromise the
safety of any system or device on your vehicle.
Improper installation and wiring of the vehicle amera system may damage the vehicle's electrical system, b u cack-p
including vital vehicle computer and operating systems. That could lead to an accident or fire, causing property damage
and /or serious personal injury. It is highly recommended to seek professional installation advice from a qualified auto
electrician or, in the alternative, to have the installation performed by a qualified auto electrician.
Please ensure that monitor is secured and mounted where it would NOT obstruct any OEM vehicle safety features.
In an event of an accident, manufacturer is not responsible for bodily injury caused by the monitor being a projectile.
Select location for mounting the monitor in desired location. Ensure monitor location will not obstruct your vision while
driving.
The manufacturer assumes no liability for damage caused to your vehicle due to improper installation or use.
Quick Installation:
The 2.4 G wireless modules come in two parts, as the tter” the “Receiver”labeled “Transmi and . The transmitter and
receiver come equipped with built hen installing the should be connected to the -in power wiring cables. Wtransmitter it ,
camera (the camera is preferably in the rear of the vehiclemounted , just above the lice The eceiver nse plate). r connects
to the included display monitor. Th receives the signal from the camera connected to the is transmitter.
Connect the transmitter's red power wire of the DC 12V input cable, to the positive 12V reverse tail light in the rear of ,
your car. Then connect the black wire of the DC 12V input and ground properly. The transmitter then plugs in, cable, to
the camera, and will supply power to the camera directly.
Next, connect the yellow RCA Video connector to the RCA Video output of the transmitter. cable Try to run this yellow
video cable through the least obtrusive and non in your vehicle-interfering route . The transmitter will automatically
broadcast the video signal to the receiver wirelessly once activated (once your vehicle is placed in reverse).
Then, grab the other wireless module (receiver) and use the red wire, of its DC 12V input cable, to connect this to your
vehicle's fuse panel (preferably to the positive 12V ignition switch voltage) which will only be powered when your vehicle -
is on, or activated by key. Then connect the black wire , , of the DC 12V input and ground properly. The receiver should be
connected to the monitor, and will supply power to the monitor directly.
Caution: This unit is designed to operate on a 12V/24V DC NEGATIVE GROUND electrical system. Connecting to other types of electrical
systems will cause damage to your vehicle. Please contact the manufacturer if you are unaware of the system type in your vehicle.

Product specificaties

Merk: Pyle
Categorie: Fotocamera
Model: PLCM4350WIR

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PLCM4350WIR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Fotocamera Pyle

Pyle

Pyle PLCM11 Handleiding

28 Mei 2023
Pyle

Pyle PLCM26 Handleiding

20 Mei 2023
Pyle

Pyle PWFI23 Handleiding

11 Mei 2023
Pyle

Pyle PLMRCDV72WT Handleiding

6 Mei 2023
Pyle

Pyle PLCM4565 Handleiding

3 Mei 2023
Pyle

Pyle PLMRC76WT Handleiding

2 Mei 2023
Pyle

Pyle PPBCM22 Handleiding

21 April 2023
Pyle

Pyle PHTCM48 Handleiding

15 April 2023
Pyle

Pyle PLCMRV77WP Handleiding

10 April 2023
Pyle

Pyle PSHTCM92 Handleiding

29 Maart 2023

Handleiding Fotocamera

Nieuwste handleidingen voor Fotocamera

Camouflage

Camouflage EZ2 Handleiding

18 April 2024
Camouflage

Camouflage SM4-PRO Handleiding

18 April 2024
Bushnell

Bushnell Prime L20 Handleiding

13 April 2024
Samsung

Samsung NX30 Handleiding

9 April 2024
Samsung

Samsung ST65 Handleiding

8 April 2024
Denver

Denver WCT-8026W Handleiding

8 April 2024
Denver

Denver WCT-8016 Handleiding

8 April 2024
Ring

Ring Stick Up Cam Battery (3rd Generation) Handleiding

6 April 2024
Joy-it

Joy-it rb-camera-ww Handleiding

3 April 2024
Joy-it

Joy-it rb-camera_JT Handleiding

3 April 2024