Pyle PLCM36 Handleiding

Pyle Achteruitrijcamera PLCM36

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PLCM36 (5 pagina's) in de categorie Achteruitrijcamera. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

WARNING: Failure to read and follow these warnings and instructions may result in serious injury, including damaged

property, so please pay close attention and exhibit the utmost care.

• The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving conditions,

obstructions, ou, the driver, must and large stationary objects. Y also remember to drive safely and properly. Use of the

Digital Backup Camera is not a substitute for safe, proper and legal driving practices.

• Never back up while looking only at your connected monito screen. You should always check behind and around r display

the vehicle when backing up just as you would if the vehicle did not have the Digital Backup Camera. Always make sure

your driving area is clear. Always back up slowly and with caution.

• Never depend on the Backup Camera entirely when backing up. The image on the screen monitor display may be slightly

different from actual and real conditions. Objects viewed in the rear view monitor differ from actual distance -time s

because a wide sed. -angle lens is u So use the camera as an aid and always follow intended driving practices to properly

judge distances from objects.

• The Backup Camera's assisted low lux lighting performance feature is also an aid to a driver. Always use your own eyes

to confirm the vehicle’s surroundings, as the displayed image may be not well lit or not entirely visible. Always proceed

with caution and perform double before proceeding. -checks

• The area displayed by the Backup Camera is limited. It does not display objects that are close to or below the just

bumper, underneath the vehicle, or objects out of the camera’s view. The camera's view can change according to your

vehicle's orientation on the road or changing road conditions.

• Be sure to check the camera is properly functioning, is properly positioned securely ed and mount , every time you

operate your vehicle.

• Make sure operates correctly, as intended, before and after installationyour trunk hatch or .

• Avoid excess water exposure around the camera Proceed with caution when cleaning your vehicle around the camera.

especially with spraying or a power washer.

• Please make sure to keep the camera clean and unobstructed from any debris

• Follow all traffic laws and motor vehicle regulations.

• Consult local laws and regulations for any restrictions on installation or use.

• Using a Backup Camera System is not adequate enough to completely eliminate a vehicle’s blind spot. Always remember

to drive with caution, following all traffic laws.

Please read all of the installation instructions carefully before installing the product. Improper installation will void

manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as

guidelines to assist in installing the system. Please consult an experienced technician if you are not comfortable

installing the product. Prior to using and installing the Backup Camera System, please read the safety information

provided in this user manual. Be sure to use the product as outlined in this user manual. Altercation or modifications

carried out without appropriate authorization may invalidate the user's right to operate the equipment.

System Installation and Wiring

Note: Camera System installation on diesel vehicles a slightly different wiring installmay require -- or possibly may not even be

compatible.

Quick Installation:

This rearview backup camera system comes in two parts, one is the , the other is the camera monitor. When

installing, the camera rear of your vehicle (preferably can be mounted in the just above the license plate).

This kit includes necessary wiring and cable connector accessories sufficient for typical connections.

However, additional accessory cables and installation materials may be necessary for a completely

secure and operational backup camera performance.

Camera Connection:

Connect the camera, using the red , of the included to the positive 12V reverse tail wire DC 12V power cable,

light in the rear of your car. Then, , connect the black wire of the DC 12V power cable, making sure to ground

properly. This connected power and ground cable ll supply power to the then connects to the camera, and wi

camera directly.

Next, use the included yellow RCA video connector cable, and run that cable from the yellow RCA video

connector jack of the camera, to the included display monitoryellow video connector of the .

Display Monitor Connection:

Connect the monitor, using the red , of the other included DC 12V power cable. Connect this wire wire to your

vehicle's fuse panel to provide power to the monitor. connect the black wire of the DC 12V Then cable making

sure the connecting is grounded properly.

The additional video input on the monitor white cable is available for connecting an additional ( connector)

monitor or display screen. The included display monitor assembly, when connected, automatically retrieves the

video signal when activated.

Caution: Connecting to other types of electrical systems will cause damage to your vehicle. Please contact the manufacturer if you are

unaware of the system type in your vehicle. Refer to the model's power requirements prior to connection and installation.

Product specificaties

Merk:	Pyle
Categorie:	Achteruitrijcamera
Model:	PLCM36
Kleur van het product:	Zwart
Gewicht:	- g
Breedte:	- mm
Diepte:	- mm
Hoogte:	- mm
Beeldschermdiagonaal:	3.5 "
Resolutie:	- Pixels
Typische contrastverhouding:	200:1
Helderheid:	200 cd/m²
Ingebouwde luidsprekers:	Nee
Formaat analoog signaal:	NTSC, PAL
Geïntegreerde TV Tuner:	Nee