Pyle PHMD05 Handleiding

Pyle Detector PHMD05

Bekijk gratis de handleiding van Pyle PHMD05 (2 pagina’s), behorend tot de categorie Detector. Deze gids werd als nuttig beoordeeld door 52 mensen en kreeg gemiddeld 3.7 sterren uit 26.5 reviews. Heb je een vraag over Pyle PHMD05 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
I. Illustration:
1. Handle
2. Switch (on/off)
3. Sensitivity tuning
4. Upper stem
5. Stem Lock Nut (to adjust the length of inner stem)
6. Lower stem
7. Knob (to adjust the angle of search coil)
8. Search coil
II. Detection Distance:
1. Iron nail: 1 ¼ - 2 ½ inches
2. US 25 cent: 1 ½ - 2 inch es
III. Features:
1. High sensitivity;
2. Easy and simple to operate;
3. Detection distance kept steady when 9V battery is used;
1
4. Save power. Alkaline battery can work over 45 hours.
5. Alarm sounds when you turn the device on or off.
IV. Installing Battery:
1. Press thumb along the direction of arrowhead mark to open the battery lid.
2. Put 1*9V (Type: 6F22) battery into the compartment matching the positive
and negative marks.
3. Close the battery cover.
V. How to use:
1. To turn the unit on by pushing the on/off switch until it clicks on and the
green LED is lit. The detector is now operational. Check the battery if there
is no audio alarm beeping.
2. Holding the unit with the search coil face towards the surface, sweep
backwards and forwards continuously at a height of ½ - 1 inch above the
area that you are scanning.
3. The presence of metal will be indicated by the audio warning tone and the
red light coming on.
4. The length of the inner stem can be adjusted automatically.
VI. Sensitivity Tune:
1. just the sensitivity; if device attain required detection distance Ad a cannot
or the sensitivity is too high.
2


Product specificaties

Merk: Pyle
Categorie: Detector
Model: PHMD05

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PHMD05 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden