Pyle PDWR69BTW Handleiding

Bekijk gratis de handleiding van Pyle PDWR69BTW (3 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.5 sterren uit 5 reviews. Heb je een vraag over Pyle PDWR69BTW of wil je andere gebruikers van dit product iets vragen? Stel een vraag

www.PyleUSA.comwww.PyleUSA.com

Wall Mountable, 100 Watts MAX

with 2-Way Full Range Stereo

Sound Reproduction, Pair

PDWR69BTB - PDWR69BTW

6.5'' Pro Active Wireless BT

Streaming Speakers

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

Note:

Anytime you note distortion, reduce the volume to a lower setting. Never

allow your amplier to be driven into "". Otherwise the speakers clipping

may be damaged. Damage caused by operating the speakers at distorted

volume levels is not covered by the warranty.

WIRELESS BT PAIRING

Ensure the speaker is connected to the power supply and turned on.

Any BT device (such as phones, tablets, laptops etc.) is available for pairing.

Note:

• Please press the "MODE" button to choose the Bluetooth input.

• There will be a prompt sound when BT is connected/disconnected.

• BT Input has the priority when BT input and RCA input are connected

simultaneously. To listen to RCA input audio, disconnect from BT before

using a RCA input device.

• One device can only connects or control one BT speaker at a time.

If device A connects and controls BT, device B cannot search or control the

BT speaker. Device A MUST no longer be connected, then device 8 can

connect and control.

• If you want to use the TWS connection, make sure two speakers are

turned ON and in BT MODE, then hold the TWS button from anyone of the

speakers for 3 seconds,two active units will connected automatically.

• If pairing fails the rst time, restart all the equipment and then follow the

above instructions.

• If you are unable to reconnect a previously connected device, remove the

"" from the list of paired devices, and then follow the above PyleUSA

instructions again.

• The BT connection will be lost if the distance between the speaker and the

BT device exceeds 1Om (32.8 ft.).

PyleUSAPyleUSA

1. Open the setting

menu and select BT.

2. Turn on BT and

search devices.

3. Click "PyleUSA"to

pair with your device.

CARE AND MAINTENANCE

• Turn off the power to the speaker when unused for long periods of time.

• Ensure all equipment is turned off prior to cleaning. Surfaces and cabinet

need only occasional dusting/cleaning. Never use chemicals or solvents as

they may damage the surface. Always clean using a dry cloth.

• Never touch the speaker drivers.

Technical Specs:

• Power Supply: 100W (MAX Power)

• RMS Power: 50W (Passive Speaker)

• Speaker Size: Sound System: 6.5'' Subwoofers: 0.5'' Tweeter

• Subwoofer Type: 6.5'' Paper Cone

• Tweeter Type: 0.5'' Mylar Dome

• Frequency Response: 70-20 kHz (+/-3dB)

• Speaker Impedance: 8 Ohm

• Audio Sensitivity: 86dB

• Construction Material: Polypropylene

• Power Cable Length: 3.94 ft.

• Power Output: 100-240V

• Single Speaker Dimensions (L x W x H): 8.5'' x 7.6'' x 11.7'' -inches

Product specificaties