Pyle PDWR30B Handleiding

Pyle Speaker PDWR30B

Bekijk gratis de handleiding van Pyle PDWR30B (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 4.7 sterren uit 13 reviews. Heb je een vraag over Pyle PDWR30B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/2

www.PyleUSA.com

PDWR30B

• Excellent for Use On Boats/ Marine/ Decks/ Patios/ Poolside/ Outdoors

• Completely Water Proof

• 3.5'' Aluminum Injection Cone Woofer

• 40 Oz. Magnet Structure

• 1'' High Compliance Myiar Tweeter

• Capacitor Crossover Network

• Bass Reex Vent for Added Bass Response

• Heavy Duty ASB Construction

• Quick Connect/ Disconnect Speaker Terminals

• Unique Spring Loaded Mounting System

• Removable Rustproof Mesh Grills

• Power: 150Watts RMS/ 300Watts Peak

• Frequency Response: 60-20K Hz

• Impedance: 4 Ohms

• Dimensions: 4.75''(W)x 7.25''(H) x 4.75''(D)

HOW TO INSTALL

MOUNTING THE BRACKET

4. DrIII pllot holes Into the mounting surface.

5. Gently pull the speaker wire though the wire hole in the center of the mounting bracket,

so that the holes all line up.

6. Use your hardware to attach the bracket to the mounting surface.

1. Remove the bracket knobs and the bracket from the speaker.

2. Hold the bracket up to the mounting surface. "PDWR30B

Waterproof Speakers" can be mounted either horizontally

or verticalIy, hold the bracket so that the speaker wire ts

through the large, circular wire hole in the bracket, align the

bracket to be square with the surrounding (Use A level for

accuracy)

3. Mark the locations of the three shaped screw holes, use all of

the holes.

MOUNTING

www.PyleUSA.com

FINAL ADJUSTMENTS

1. After checking that the speaker is in-phase and works correctly, angle the speaker for the

best sound.

2. Hand tighten rhe bracket knobs only, power tools may over-tighten rhe knob, and strip

the threads of the insert.

3. Check that the entire installatlon is safe and secure.

CONNECTING YOUR SPEAKERS

Connecting the speakers to your amplier or receiver.

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

• First turn your amplier OFF to avoid

damage which may result from accidental

shorting of the speaker leads.

• Correct phase polarity is critical for proper

stereo imaging and bass performance.

The red (+) terminal on your amplier or

receiver must be connected to the red (+)

terminal on your speaker, the same

applies for the balck (-) terminal.

• Connect one loudspeaker at a time to

ensure proper connection of left and

right channels. Make sure all wires are

rmly fastened.

• If you notice a high lavel of bass or

central image focus, double check your

connections for proper polarity.

Product specificaties

Merk:	Pyle
Categorie:	Speaker
Model:	PDWR30B
Kleur van het product:	Zwart
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC
Gemiddeld vermogen:	150 W
Impedantie:	4 Ohm
Audio-uitgangskanalen:	2.0 kanalen
Speaker plaatsing:	Muur-montage
Aantal drivers:	2
Woofer:	Ja
Peak Music Power Output (PMPO):	300 W
Frequentiebereik:	60 - 20000 Hz
Versterkeraansluiting (binding post):	Ja
Diameter woofer:	3.5 "
Diameter hogetonenluidspreker:	1 "
Tweeter:	Ja
Afmetingen (B x D x H) (Brits):	4.75 x 4.75 x 7.25 "