Pyle PDWMU103 Handleiding

Pyle Microfoon PDWMU103

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PDWMU103 (6 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
UHF Wireless Microphone System
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.PyleUSA.com2www.PyleUSA.com 3
2
3
4
5
6
7
Please read this manual carefully before using and strictly operate and store
in accordance with the instructions. Please save it for your future reference.
The wireless system is reliable in performance, portable and easy to operate,
and is suitable for use at home, school, training room and outdoor performance.
The wireless system adopts advanced intelIigent digital technology and high
integrated circuit design, which has the advantages of strong stabiIity, intelligence
and high eciency.
FEATURES
1. UHF frequency for stronger anti-interference abiIity and stable transmission
distance.
2. The transmitter has a frequency modulation function to meet the simultaneous
use of multiple frequencies.
3. The receiver adopts automatic frequency lock design, which makes operation
simpler and smarter.
4. Mini receiver design with 6.35mm standard audio plug, plug and play.
5. The receiver has a rechargeable function, circuit protection technology and a
detachable large-capacity Iithium battery. It can also be connected to a power
bank for Iong-term oIine use.
6. Easy to operate, easy to use and have a good sense of experience.
RECEIVER FUNCTION DESCRIPTION
1. 6.35mm audio plug
2. Power switch
3. Power indicator, charging indicator
4. DC 5V charging port
5. RF signal indicator
6. Antenna
7. 18650 lithium battery negative electrode*
8. 18650 lithium battery compartment
9. 18650 lithium battery positive electrode*
Note: Be sure to conrm the positive/negative battery before installing it to avoid
damage to the receiver! Please fully charge the lithium battery before using it.
TRANSMITTER FUNCTION DESCRIPTION
1. Handheld Microphone
+
-
18650
2
3
4
5
6
7
8
91. Microphone head
2. LED display
3. Microphone switch
4. CH button
5. Battery compartment
6. Transmitter antenna
7. Tail cover
www.PyleUSA.com4www.PyleUSA.com 5
1
2
3
4
6
5
7
8
BODYPACK TRANSMITTER
1. Antenna
2. Volume Adjust and ON/OFF button
3. Microphone Connector
4. CH Button DOWN
5. CH Button UP
6. LED Display
7. Battery compartment
Double AA batteries (AA 1.5VX2)
8. Headset microphone
(Lavalier microphone)
OPERATION
Tips:
Under normal circumstances, the product has been completed at the factory, and
can be used normally after opening the box, no need to adjust the frequency.
If you need to adjust the frequency, please follow the steps below.
Note: Before operating, make sure the transmitter and receiver are both o.
The operation sequence of handheld microphone:
1. Operate the transmitter
2. Open the receivers
3. Conrm at the transmitter
1. Press and hold the power button and CH button of the transmitter at the same
time until the LED display ashes then release the button.
2. Turn ON the receiver power button, please pay attention to the RF signal indicator
of receiver. Under normal circumstances, the receiver RF signal indicator ashes
continuously for 4 times and then goes out. (In this case, the receiver and the
transmitter are connected successfully.)
3. Short press the transmitter CH button to conrm the connection between the
transmitter and the receiver. At this time, the transmitter display stops ashing,
and the receiver RF signal indicator is always ON, indicating that the receiver and
the transmitter are connected successfully.
Note:
If it can’t be connected, please repeat the above operation.
(The transmitter must be operated before the receiver is turned ON.)
When the same frequency interference occurs, please short press the transmitter
CH button. At this time, the transmitter will change the frequency to avoid
frequency interference.
Bodypack Transmitter Operation Sequence
1. The transmitter and receiver are both o.
2. Press and hold " " CH button and turn ON the power switch button to " " at ON
the same time until the LED display ashes for 4 seconds, then release the " "
CH button.
3. Turn ON the receiver power button, pay attention to the RF signal indicator of
receiver. Under normal circumstances, the receiver RF signal indicator ashes
continuously for 4 times and then goes out.
(ln this case, the receiver and the transmitter are connected successfully)
4. Short press the transmitter " " CH button to conrm the connection between
the transmitter and the receiver. At this time, the transmitter display stops
ashing, and the receiver RF signal indicator is always ON, indicating that the
receiver and the transmitter are connected successfully.

Product specificaties

Merk: Pyle
Categorie: Microfoon
Model: PDWMU103

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PDWMU103 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Microfoon Pyle

Pyle

Pyle PDWMU90 Handleiding

11 Maart 2024
Pyle

Pyle PSW101CM Handleiding

5 Maart 2024
Pyle

Pyle PSW770 Handleiding

5 Maart 2024
Pyle

Pyle PSWLE56 Handleiding

24 Februari 2024
Pyle

Pyle PSW115 Handleiding

24 Februari 2024
Pyle

Pyle PSMRS08 Handleiding

27 Augustus 2023
Pyle

Pyle PSMRSWD100 Handleiding

26 Augustus 2023
Pyle

Pyle PYPMHM2 Handleiding

5 Juli 2023
Pyle

Pyle PKST52 Handleiding

20 Juni 2023
Pyle

Pyle PDWM2560 Handleiding

12 Juni 2023

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Sony

Sony F-115B Handleiding

26 April 2024
Sony

Sony ECM-66BC Handleiding

26 April 2024
Sony

Sony ECM-GZ1UBMP Handleiding

26 April 2024
Sony

Sony ECM-77LM Handleiding

26 April 2024
Sony

Sony ECM-77BC Handleiding

26 April 2024
Shure

Shure AXT910 Handleiding

17 April 2024
Shure

Shure ADX3 Handleiding

17 April 2024
DAP Audio

DAP Audio CM-95 Handleiding

9 April 2024
DAP Audio

DAP Audio WPS Guitar Handleiding

9 April 2024
Audix

Audix M55D Handleiding

9 April 2024