Pyle PCRBDR27 Handleiding

Bekijk gratis de handleiding van Pyle PCRBDR27 (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over Pyle PCRBDR27 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Kerb Ramp Dimensions

Installation Method

Plastic Kerb Ramps provides a safe transition from roadway to footpath for pedestrians,

are portable light duty modular ramps suitable for trucks, cars or hand trolleys.

Built-in channels allow for cable access and storm water flow. Often used in temporary

or permanent installation.

Before starting installation, please ensure you’ve check the location of any underground

cables or service.

1. Measure and mark the required locations of the kerb ramps as per the above table.

2. Position a kerb ramp in where are need access over a kerb.

3. Concrete surface (each kerb ramps need two 10*100mm / 1*10cm expansion bolts)

• Mark each locating point and drill a hole to a depth of 100mm / 10cm

• Remove any dust from the hole and surface.

• Insert each expansion bolt and tighten.

Bitumen surface (each kerb ramps need 300mm / 30cm long spikes)

• Drive a spike through each of the two locating point.

490mm (49cm)

275mm (27.5cm)

104.4mm

14

(10.44cm)

SCAN ME

PyleUSA.com

Visit Our Website

Plastic Kerb Ramp

Installation Instructions

ENG

PCRBDR27

Product specificaties