Pyle PAHT6 Handleiding

Pyle Speaker PAHT6

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PAHT6 (6 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

























Introduction

Thank you for purchasing this Pyle Pro PAHT Tweeter System. The

loudspeaker is designed to provide you years of high performance in any

application that you require. Please read this manual carefully to fully

maximize the performance of the speaker.

Maintenance and Safety

• Do not expose the speaker to moisture.

• Avoid hot and cold temperature extremes.

• Clean using a damp cloth. Make sure that no moisture contacts the

drivers. You can use a hand vacuum to clean the carpet.

• Do not attempt to service the unit. Refer service to a certified Pyle Pro

technician.

• This loudspeaker is capable of producing extremely high SPL levels.

Use earplugs when necessary.

Features

The PAHT series features high-level

drivers and rugged components and is

designed for high-performance applications.

The cabinet features heavy-duty

construction with reinforced corners. It is

covered with a black-carpeted finish that

will stand up to years of tour duty.

The piezo tweeters produce crystal

clear highs and will add that special sparkle

to your sound system. The PAHT9 adds a

compression driver that complements the

piezo drivers in producing the high range

frequencies and extends the frequency

response down to 1 kHz.

The integrated passive crossover

network is assembled using

quality components and functions as a high pass filter.





Connections

The PAHT speakers have “Quick Connect” speaker terminals, which

accommodate wire leads.

Make certain that the wires you are using are at least 14 gauge

unshielded speaker cable (the lower the number, the thicker the wire). Do

not use shielded “instrument” cables.

Amplifier Requirements

Check the product specifications (page 4) to see the power handling

for your model. There are a couple of considerations to keep in mind when

choosing an amplifier to drive your PAHT series speaker. While it is true

that an amplifier with a higher power rating can damage the drivers, under-

powering can be even more dangerous. When an amplifier is overdriven and

starts distorting, it generates transient frequencies that are much louder than

the program material. These wayward frequencies could damage your

speaker. A proper match is an amplifier which could drive the speaker up to

the cabinet’s RMS rating, without exceeding the amplifier’s own RMS level.

Operation

When powering on your equipment, make sure the volume level on

the amplifier is turned all the way down. This is to avoid the “popping”

noise, which could damage your speaker.

High frequencies are unidirectional while low frequencies are omni

directional. Being that this is a tweeter system, it is important that the

speaker be placed so that the high frequencies reach the intended listeners

properly. Make certain that no person or object could come to interrupt the

line-of-site between the loudspeaker and the audience.

When using more than one loudspeaker, you have to account for

phase alignment. When the speakers are close together this is not usually an

issue. However, when they are far apart, the sound from one speaker may

reach the ear a fraction of a second before the other. This will cause certain

frequencies to cancel out, altering the sound. To avoid this, you may have to

use a delay processor to align the sound from the speakers.

Product specificaties

Merk:	Pyle
Categorie:	Speaker
Model:	PAHT6
Kleur van het product:	Zwart
Gewicht:	4082 g
Breedte:	495.3 mm
Diepte:	254 mm
Hoogte:	139.7 mm
Connectiviteitstechnologie:	Bedraad
Type stroombron:	Niet ondersteund
Gemiddeld vermogen:	150 W
Equalizer-instellingen:	Nee
Impedantie:	8 Ohm
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Vloer
Aantal drivers:	6
Woofer:	Nee
Peak Music Power Output (PMPO):	300 W
Frequentiebereik:	4000 - 27000 Hz
Gevoeligheid:	97 dB
Versterkeraansluiting (binding post):	Ja
Versterker:	Nee
Diameter hogetonenluidspreker:	63.5 "
Tweeter:	Ja
Aantal producten inbegrepen:	1 stuk(s)