Pyle PACGAMP77 Handleiding

Bekijk gratis de handleiding van Pyle PACGAMP77 (2 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.0 sterren uit 6 reviews. Heb je een vraag over Pyle PACGAMP77 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

15 Watt Acoustic Guitar Amplifier

8'' Speaker with Volume, Bass, Treble, Gain,

Drive Switch and Digital Reverb Controls

IMPORTANT SAFETY INSTRUCTIONS

WARNING:Before going any further, make sure that your amplier is compatible

with your mains electricity supply.

1. Ensure that the (power) switch is set to the position.MAINS OFF

2. Connect the supplied mains (power) lead into the mains electricity supply.

3. Ensure that the VOLUME controls are set to zero.

4. Plug your guitar into an jack socket.INPUT

5. Turn the front panel switch to the position.MAINS ON

6. Turn the VOLUME up to your preferred level and your amplier is ready to play.

Function

1. INPUT: Input for your guitar. Use a good quality guitar cable (i.e. one that’s

screened/shielded) to help prevent noise, interference and unwanted feedback.

2.VOLUME:This is the overall level control for the normal channel.

3. Increasing the Treble will make your sounds brighter and more cutting, TREBLE:

turning it down will decrease your tone’s edge and make it sound softer as a result.

4. Adjusts the sound level of middle-frequency range.MIDDLE:

5. Adjusts the sound level of the low-frequency range.BASS:

6. CHORUS CONTROL: Rotating this control clockwise increases the modulation

rate of the chorus eect.

7. Connect headphones to this jack.PHONES:

8. The power switch turns your amplier on and o.POWER:

*No sound is played through the unit s speaker while the PHONES jack is in use.

www.PyleUSA.com

8

12 35467

Product specificaties