Pyle AZPSTND35 Handleiding

Bekijk gratis de handleiding van Pyle AZPSTND35 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over Pyle AZPSTND35 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PSTND35

Heavy Duty Telescoping Height

Adjustment Monitor Speaker Stand

(Pair)

www.pyleaudio.com

ASSEMBLING:

1. Take one long hex bolt and one washer and

insert through hole in center of one triangular

base on side with rubber feet.

2. Thread the long hex bolt into the bottom of

one vertical shaft and tighten hex bolt with the

provided Allen wrench to secure vertical shaft to

triangular base.

3. Unthread and remove short hex bolt with

washer located in the top of the vertical shaft.

4. Insert short hex bolt with washer through hole

in the center of one monitor plate and thread into

top of the vertical shaft. Secure monitor plate to

vertical shaft with the Allen wrench.

5. Adjust monitor plate height by loosening large

thumb knob on clutch housing and move upper

shaft to desired height.

6. Insert safety pin all the way through vertical

shaft at lowest hole exposed, allowing the safety

pin to rest on clutch housing. Secure by tightening

large thumb knob on clutch housing.

7. When placing stand on carpet, remove the

rubber feet from triangular base and screw in

three leveling carpet spikes. Adjust carpet spikes

so that the monitor platform is level.

8. Repeat steps 1 thru 7 for second stand

Product specificaties