Pure Acoustics Jolt ProW225S Handleiding

Bekijk gratis de handleiding van Pure Acoustics Jolt ProW225S (2 pagina’s), behorend tot de categorie Mediaspeler. Deze gids werd als nuttig beoordeeld door 35 mensen en kreeg gemiddeld 4.8 sterren uit 6 reviews. Heb je een vraag over Pure Acoustics Jolt ProW225S of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1.Power key: on/off.

2.Mute

3.Pause/Play

4.Previous

5.Next

6.Volume +

7.Volume -

Remote Control

8.Setting

9.Return

10.Play by AUX Mode

11.Play by Bluetooth model

12.Play by USB/TF card

Precautions

Smart Android Music Controller

4inch Touch Screen Amplifier

Please read this user manual carefully before use the device

and keep the manual properly.

Note : Appearance of the device and main interface of system

are for reference only . Please refer to the actual product for

details.

The company continuously improves product performance, and

design specifications are subject to change without notice.

1. Power Switch: turn right to power ON and turn left to power OFF.

2. Host Switch Key: long press for 2 seconds to turn on, long press for 2

seconds to turn off, short press for lock screen/unlock.

3. 3.5 Audio Input: 3.5mm Audio wire .

4. Micro-USB: USB disk up to 32GB.

5. TF Card: up to 32GB.

6. Power Terminal: Compatible AC90-250V power supply, power cable with two

strands of copper core wire,single strand copper core over 0.75mm².

7. SPK R+ & SPK R-: 4 Speakers(each RMS25W/4-8Ω) Speaker wire 200cores.

RVH2X100, RVH2X200.

8. OUT R + OUT L + GND: for an extra amplifier or active subwoofer, audio

output wire: Audio wire (three core shielded wire: commonly known as

microphone wire). RVVP2X0.5, RVVP2X0.75mm².

9. AUX L + AUX R + GND: audio input wire: Audio wire (three core shielded wire:

commonly known as microphone wire). RVVP2X0.5, RVVP2X0.75.

10. RJ45: Connect network cable .

Figure 1

Figure 2

1. This host is suitable for AC90-250 power supply, please install and debug under the

guidance of professionals.

2. Please read this manual carefully and follow the installation instructions strictly.

3. Please check the binding posts carefully for speaker cables, power cables, and audio

input cables.

4. Make sure that all connecting lines are accurate before turning on the computer.

5. Please do not modify, dismantle, repair or upgrade the host by yourself.

6. When not using the main unit for a long time, please turn off the main power switch.

1Pre-embed attached back cover size 80x80mm, depth is 57mm.、

2Tighten the bracket on the 86 cassette with bracket screws. (As shown in 、

Figure 1)

3Tighten the wire inside the back cover to the corresponding function terminal 、

on the device. Then insert the terminals into the binding post. Then put the

device into the bracket and push down to fix the device. (As shown in Figure 2)

External Interface Diagram

1

1

1

11

2

2

2

22

7

7

7

77

8

8

8

88

9

9

9

99

1

1

1

110

0

0

00

2Channel

Product specificaties