Pure Acoustics BQ 260 Handleiding

Bekijk gratis de handleiding van Pure Acoustics BQ 260 (1 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 45 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Pure Acoustics BQ 260 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Take the cardboard template that comes with the speakers and

place it where you want the speaker to be mounted.

Draw around the template and cutout the speaker mounting hole.

Run quality speaker wire (12-16 gauge ) to that location.

Carefully pry off the grill from the speaker either using a small

screwdriver at the edge of the grill or with a small awl catching the

grill by one of its holes.

Connect the speaker wire to the speaker terminals and insert the

speaker into the hole.

There are screws around the perimeter of the face of the speaker

(6 on the inwalls). These screws connect to ‘wings’ in the rear of the

speaker which will swing out and clamp the speaker to the wall as they

are tightened.Secure the speaker to the wall by tightening these screws

until the speaker is securely mounted.

Reattach grill.

That’ s It ! Enjoy !

In-wall Speakers

Cutout Dimensions

BQ 260: 183 x 183mm

BQ 108: 247 x 247mm

BQ 360: 183 x 119mm

BQ 450: 356 x 148mm

BQ Series

Product specificaties