Pulse ShowerSpas 1010 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pulse ShowerSpas 1010 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Adjustable Slide Bar
Model #1010
Owner's Manual
SLIDE BAR
2
14
15
12
13
11
10
10
9
9
8
8
7
7
6
G
22 5/8" (575 mm)
M
J
I
H
(Not Included)
Adjustable Slide Bar Installation
1. Hold Adjustable Slide Bar (6) in desired mounting
location. Evaluate range of adjustment and potential
interference of handshower hose (15) (Diagram G).
2. Mark wall for two mounting holes. Before drilling
ensure no live plumbing could be damaged.
3. Slowly drill 1/4" (6mm) wide by 1" (25mm) deep
holes 22 5/8 inch (575mm) apart. Make sure holes are
plumb.
IMPORTANT: Supplied anchors are for solid surface
only i.e. tile, marble etc. If mounting to
hollow or fiberglass wall a different an-
chor/screw and hole size may be required.
4. Insert wall anchors (10) until flush with wall. Slide top
mount (7) over slide bar (Diagram H) and secure with
screw (8) (Diagram I).
5. Slide soap dish (12) (Diagram J) onto slide bar and
tighten set screw (11).
5. Slide lower mount (7) over slide bar and secure with
screw (8).
6. Press covers (9) into mounts (7) (Diagram M).
7. Place washer (14) in hex head of hose (15) and con-
nect to diverter outlet. Place washer (14) in smooth end
of hose and connect handshower (13). Place handshow-
er into holder. Handshower (13), washer (14), and hose
(15) not included.


Product specificaties

Merk: Pulse ShowerSpas
Categorie: Niet gecategoriseerd
Model: 1010

Heb je hulp nodig?

Als je hulp nodig hebt met Pulse ShowerSpas 1010 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Pulse ShowerSpas

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd