Proclip 216251 Handleiding

Bekijk gratis de handleiding van Proclip 216251 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 87 mensen en kreeg gemiddeld 4.8 sterren uit 6 reviews. Heb je een vraag over Proclip 216251 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Item No. 216251 - Extension Plate

View Color

Instructions

Compatible with:

Fits all 7xx266 10.1" Cradles

Zebra ET50/51/55/56 10.1"

Important:

Self-installation instructions and advice are provided for your

convenience. It is your responsibility to determine if you have the

knowledge, skills, and physical ability required to properly perform an

installation. ProClip USA, LLC. shall have no liability for damage or

injury resulting from the installation or use of any ProClip or third

party products. It is your responsibility to ensure that all products are

installed in adherence with local laws and regulations and in such a

manner as to allow a vehicle to be operated safely and without

distraction. ProClip USA, LLC. product warranties do not cover the

installation, removal or re-installation of any product.

This Extension Plate has pre-drilled holes for the ProClip and AMPS standard.

Attention:

Carefully read all instructions and review the images before installing this product.

1. Remove existing M5 Fasteners:

The Extension Plate includes 2 longer M5 fasteners to attach directly to the

cradle. Start by removing the M5 fasteners on the side you prefer to install the

extension plate onto.

3. Tighten the Fasteners:

Using the included Allen wrench, tighten the fasteners firmly down to press the

lock washers into place and prevent the screws from moving under vibration.

2. Attach the Extension Plate:

Place the extension plate over the M5 holes and attach directly to the cradle using the

included M5 x 16 Fasteners and lock washers included with the extension plate.

4. Extension Plate Options:

The extension plate allows for the attachment of additional cradles or holders for

accessories such as a #216217 universal holder for a barcode scanner.

Product specificaties