Proaim P-LLBT-150 Handleiding
Bekijk gratis de handleiding van Proaim P-LLBT-150 (6 pagina’s), behorend tot de categorie Statief. Deze gids werd als nuttig beoordeeld door 54 mensen en kreeg gemiddeld 4.5 sterren uit 27.5 reviews. Heb je een vraag over Proaim P-LLBT-150 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
HD 150mm Bowl Baby Camera Tripod Stand w
Lever Fricon and Aluminum Spreader (P LLBT- - -150)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
HD 150mm Bowl Baby Camera Tripod Stand
with Lever Fricon
Spanner Size: 13mm
Aluminium Spreader
A s s e m b ly Ma n u a l
2
Aluminum Spreader Setup
• Extend the Spreader on the oor and loosen
all three knobs.
NOTE: The Spreader aaches to the spiked legs
of the spreader to provide precise customizaon
of the tripod's length and stability.
• Aer loosening the knobs, extend the
Spreader per your requirement.
• You can lock the posion using the locking
knobs present on each arm.
NOTE: The arms of the Spreader can easily
telescope out from 41cm/16 to 66cm/26” ”
radius, oering a broader footprint to create a
secure and steady base for the tripod.
Extendable adjustment via the provided locking knobs of Spreader
3
• Loosen all three adjustment knobs to set the
desired height of the Stand.
NOTE: One stage telescopic design with fricon -
knob extends up to 6 inches to capture
low angle shots, and conversely, it can be easily -
extended up to 34 inches for greater elevaon.
• Aer seng the height, ghten the knobs to
secure the Stand, as shown in the image.
NOTE: Locking pins on each leg secures the
adjusted height, prevenng them from
retracng under load.
• Unlock the red knob to adjust the Tripod s legs ’
according to your requirement.
• Aer adjusng the Tripod legs, re-lock the
knob, as shown in the image.
• Mount the Tripod on the aluminum Spreader
by equally aligning them.
• Aer mounng the Tripod, properly secure it
using the rubber gripper.
150mm Bowl Baby Camera Tripod Stand Setup
Product specificaties
| Merk: | Proaim |
| Categorie: | Statief |
| Model: | P-LLBT-150 |
Heb je hulp nodig?
Als je hulp nodig hebt met Proaim P-LLBT-150 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Statief Proaim
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
30 Januari 2025
7 December 2024
Handleiding Statief
- SmallRig
- Kessler
- Libec
- AVerMedia
- HPRC
- Levenhuk
- Alpine
- MotoCrane
- Insta360
- Essentiel B
- Ravelli
- Robus
- Winegard
- ZWO
- Pedco
Nieuwste handleidingen voor Statief
31 Juli 2025
31 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025