Proaim CT-VNGD-CS Handleiding
Proaim
Flat panel steun
CT-VNGD-CS
Bekijk gratis de handleiding van Proaim CT-VNGD-CS (4 pagina’s), behorend tot de categorie Flat panel steun. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 5.0 sterren uit 6 reviews. Heb je een vraag over Proaim CT-VNGD-CS of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
A s s e m b l y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
1 x Top Part of Cart
1 x Spanner (13)
1 x Allen key (6mm)
Vanguard Collapsible Cart for Holding C stands -
(CT-VNGD- CS)
2 x Side Extension
4 x Bolts
2 x Pneumac wheels
1 x Base Part of Cart
2
• Follow the same process on the other
side extension.-
Vanguard Cart Setup
• To aach the pneumac wheels, remove the
side bolt of the wheel shank on the base part
with the help of an Allen key.
• Insert the wheel into the wheel shank and
secure by inserng a bolt.
• Aaching the side extension to the base part,
insert the bolt and secure with the help of a
nut.
• Tighten the bolt properly from both the sides
with the help of the spanner.
• Then ghten it properly with the help of an
Allen key. Follow the same process to aach
the other wheel as well.
• NOTE: The C stand cart rolls incredibly smooth -
and silent with reliable and lightweight two
front Pneumac wheels and two rear swivel
caster wheels with brakes.
3
YOUR PROAIM VANGUARD CART FOR HOLDING C STANDS-
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
• Then insert the nut & bolt and properly secure
with the help of the spanner.
• Finally, the top part has been properly
aached to the cart.
NOTE: It has two D shaped sturdy handles on -
the top of the cart for a solid and comfortable
hold.
• Aach the top part matching both the side
extensions.
Product specificaties
| Merk: | Proaim |
| Categorie: | Flat panel steun |
| Model: | CT-VNGD-CS |
Heb je hulp nodig?
Als je hulp nodig hebt met Proaim CT-VNGD-CS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Flat panel steun Proaim
2 April 2025
2 April 2025
2 April 2025
7 December 2024
7 December 2024
7 December 2024
21 Juni 2024
16 Mei 2024
Handleiding Flat panel steun
- Reflecta
- Kogan
- Amer
- StarTech.com
- Vogels
- Bell'O
- ErgoAV
- GPX
- Kondator
- XTRARM
- Mounting Dream
- HQ
- LTN Technologies
- Walker Edison
- Dell
Nieuwste handleidingen voor Flat panel steun
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
21 Juli 2025
19 Juli 2025
19 Juli 2025
19 Juli 2025
19 Juli 2025
19 Juli 2025