Pro-Ject Uni Box S3 Handleiding
Pro-Ject
Hifi systeem
Uni Box S3
Bekijk gratis de handleiding van Pro-Ject Uni Box S3 (9 pagina’s), behorend tot de categorie Hifi systeem. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.4 sterren uit 3 reviews. Heb je een vraag over Pro-Ject Uni Box S3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/9
INSTRUCTIONS FOR USE
Pro-Ject Uni Box S3
© Pro-J Audio Systems Uni Box · Revision 5. . ect · S3 202 06 26
2
Dear music lover,
thank you for purchasing a P -Ject Audio Systems streaming amplifier. ro
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to connect/disconnect the unit from the mains. Make sure that the power supply
is easily accessible at all times. Never handle the device, the power supply while your hands are wet or
damp. Avoid letting liquids enter the device or the power supply. Never place any item containing
liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power
supply. Never place any naked flame sources, such as lighted candles on or near the device. The product
shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar
conditions.
Connectors
1. Make all connections except the connection the headphone whilst the disconnected from to unit is
the mains.
2. Never connect or disconnect power supply to or from the unit whilst the power supply is connected to
the mains! Never use any other power supply than the one supplied with the unit with the exception of
dedicated Power Boxes which can replace original power supplies.
3. Take care to connect the left and right channels of In
In
In
InIn
1
1
1
11 2
2
2
2 2 3
3
3
3 3 , In
In
In
InIn , In
In
In
InIn correctly. The right channel is
usually marked red, the left channel black or white.
4 Speaker connections for the left speaker are located on the right hand side of the rear view. Speaker
.
.
.
. .
connectors marked red represent according indicators on speaker terminal
+
+
+
++ .
Analog o put (Variable Output) ut
A power amplifier, active loudspeakers or an active subwoofer can be connected to the output sockets marked
Variable
Variable
Variable
VariableVariable Out
Out
Out
OutOutput
put
put
putput .
Connection to the speakers
The output terminals accept speaker cables terminated with 4mm Banana plugs, spades connectors or
naked wire.
© Pro-J Audio Systems Uni Box · Revision 5. .ect · S3 202 06 26
3
Phono input
Connect the tonearm signal lead to the of the amplifier. The earthing wire may be connected to
In
In
In
In In 1
1
1
1 1 (Phono)
(Phono)
(Phono)
(Phono)(Phono)
the screw terminal if you encounter hum problems when using the turntable. The phono input is suitable for
MM and High-Output MC cartridges.
Line inputs
Line level sources (CD player, radio or TV) can be connected to the inputs marked .
In
In
In
In In In
In
In
InIn
2
2
2
2 2
or
or
or
oror 3
3
3
3 3
Digital inputs
Sources with a digital output such as TV satellite/cable receiver or a game console can be connected to the
digital inputs. Optical to Coaxial to HDMI to
In
In
In
In In 4 and
4 and
4 and
4 and4 and In 5,
In 5,
In 5,
In 5, In 5, In
In
In
InIn 6,
6,
6,
6, 6, In
In
In
InIn 7
7
7
7 7
.
.
.
. .
Mains power connection
Connect the low voltage plug from the power supply to the socket before connecting the power supply
Power
Power
Power
Power Power
to the mains.
Front panel controls
To switch on from standby or to standby
The push button on the left side of the front panel turns the unit on or back into standby. The blue LED above
the stand-by push button shows that the unit is switched on. Mute is active when LED is blinking.
Input selector
Pressing the buttons and selects the desired input The LEDs show which input is currently active. ◄ ►.
Stream button
The St
St
St
StStream
ream
ream
ream ream button in the lower right corner on the front panel can be used to pause/resume streaming. The
Stream LED to the left of it shows the current streaming status:
State
State
State
State State
Colour
Colour
Colour
Colour Colour
Flashing/
Flashing/
Flashing/
Flashing/Flashing/Solid
Solid
Solid
Solid Solid
Boot- up
Green
Flashing fast
OOBE/Ready to Setup
Green
Flashing slow
BT ready to pair
Yellow
Flashing slow
Connecting to WiFi
Yellow/Green
Flashing fast
Connected to WiFi
Green
Solid
BT mode, paired
Yellow
Solid
Aux-in mode
Red
Solid
OTA
Red/Green
Flashing slow
Restore to factory setting
Red/Green
Flashing slow
Product specificaties
| Merk: | Pro-Ject |
| Categorie: | Hifi systeem |
| Model: | Uni Box S3 |
Heb je hulp nodig?
Als je hulp nodig hebt met Pro-Ject Uni Box S3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hifi systeem Pro-Ject
30 Juli 2025
29 Juli 2025
27 Februari 2025
27 Februari 2025
27 December 2024
15 November 2024
1 November 2024
28 December 2023
28 November 2023
28 November 2023
Handleiding Hifi systeem
- LG
- Monster
- Accsoon
- BSS Audio
- Jensen
- Parasound
- Glorious
- Cmx
- Andover
- Vankyo
- RCA
- JK Audio
- Thomson
- AEG
- HK Audio
Nieuwste handleidingen voor Hifi systeem
30 Juli 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025
21 Juli 2025
16 Juli 2025
15 Juli 2025
15 Juli 2025
14 Juli 2025