Pro-Ject Speaker Box 10E Carbon Handleiding
Bekijk gratis de handleiding van Pro-Ject Speaker Box 10E Carbon (8 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.5 sterren uit 3.5 reviews. Heb je een vraag over Pro-Ject Speaker Box 10E Carbon of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
INSTRUCTIONS FOR USE
Speaker Box 10E Carbon
© -Pro Ject Audio Systems S E 4.03.14 · peaker Box 10 Carbon · Revision 202
2
Dear music lover,
thank you for purchasing a udio Systems speaker P -Jfrom ro ect A .
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Safety instructions
Avoid spilling liquids on speaker, connection terminal or speaker cable. Never place any item
containing liquid, such as a flower vase on or near the device. Never place any naked flame
sources, such as lighted candles on or near the speakers. The product shall not be used in damp or
wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Assembly
Step 1:
Step 1:
Step 1:
Step 1:Step 1: Place the speaker upside down (ideally on a carpet, not to scratch top surface)
Step 2:
Step 2:
Step 2:
Step 2:Step 2: the Position base plate plate with 4 screws ecure & s each
Step 3:
Step 3:
Step 3:
Step 3:Step 3: Mount 4 spike feet by screwing them into the nuts of base plate
Step 4:
Step 4:
Step 4:
Step 4:Step 4: Place the speaker with base and spikes onto the floor
(spike discs can be added to avoid scratches on the floor) underneath
Loudspeaker positioning
Ideally away wall apart., the loudspeakers should be positioned at least 60 cm from s and 1 meters ,8 The
space between the two loudspeakers and the distance to the listeners are important. If loudspeakers are placed
too close together or too far apart, stereo images will not be fully developed. In average living rooms, speaker
spacing between 2 and 4 met s will usually produce satisfactory results. Theer listener’ he s distance to t
loudspeakers should be equal to the distance (equilateral tria between the loudspeakers ngle).
© - S E 4.03.14 Pro Ject Audio Systems · peaker Box 10 Carbon · Revision 202
3
A Toeing-ngle your speakers inward, so the drivers directly point to your ears. in the speakers helps with the
perception of the stereo image. You can decrease the toe- Experiment in angle to create a wider stereo image.
to find your sweet spot!
Amplifier capacity - power handling
Your loudspeaker system will operate satisfactorily with any good amplifier designed for -use with an 4 8 Ohm
impedance load. Although loudspeakers are designed to handle high power loadings, you must remember
that any loudspeaker that is abused with excessive use of volume, tone controls and graphic equali ers is likely z
to cause damage to the drive Be careful especially with small amplifiers constantly driven on high power -units.
levels as these may be liable to go into „clipping mode“ and distort the signal causing possible damage. If you
hear a distorted signal through the loudspeakers, you must reduce the power level.
Connection to your amplifier
We strongly recommend the use of high- quality speaker cables, colour coded or grooved cables are
recommended to assist checking polarity, your local dealer should be able to advise you on this point. Always
switch OFF your amplifier before making any connections or adjustments to the system. Wire the right -hand
channel cable so that the positive (RED) terminal of your loudspeaker is connected to the positive (RED) on
your amplifier, and the negative (BLACK) terminal of your loudspeaker is egative (BLACK) connected to the n
terminal on your amplifier. Repeat the instructions for the left-hand channel. Do NOT connect more than one
loudspeaker to one terminal on your amplifier.
Set the volume level to minimum before switching on the amplifier!
Speaker Grills
W the e recommend operating speakers without grills, as the delicate treble can spread absolutely freely. Our
almost acoustically transparent speaker grilles only serve as protection against outer influences (e.g. pets).
Product specificaties
| Merk: | Pro-Ject |
| Categorie: | Speaker |
| Model: | Speaker Box 10E Carbon |
Heb je hulp nodig?
Als je hulp nodig hebt met Pro-Ject Speaker Box 10E Carbon stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Pro-Ject
14 Juni 2025
14 Juni 2025
11 December 2024
25 September 2024
28 April 2023
3 April 2023
14 December 2022
17 Oktober 2022
Handleiding Speaker
- Posh
- Naxa
- HEOS
- Atlas
- Audio Design
- Kraun
- Medion
- Imperial
- Woxter
- Escape
- Ikegami
- New One
- Yamaha
- Sharper Image
- Difrnce
Nieuwste handleidingen voor Speaker
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025