Premier Mounts AST-1321 Handleiding

Premier Mounts Niet gecategoriseerd AST-1321

Lees hieronder de 📖 handleiding in het Nederlandse voor Premier Mounts AST-1321 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

AST-1321 Suspension Adapter

Page - 1 - Installation Instructions

9533-011-031-00

AST-1321 INSTALLATION INSTRUCTIONS

Single Stud Installation

1. Secure the ceiling plate to the ceiling structure (see WARNING).

2. Use suitable hardware (commercially available) depending on your installation environment to secure the

two (2) mounting points found on the ceiling plate to the ceiling structure (Figure 1).

3. Refer to ceiling mount or adapter installation instructions to complete the installation.

WARNING: Do not attach equipment over 160 lbs to the AST-1321. The ceiling structure must be capable of

supporting a minimum weight of 320 lbs. If not, the ceiling must be reinforced. Proper

installation procedure by qualied personnel as outlined in the installation instructions must be

adhered to. Failure to do so could result in serious personal injury.

WARNING: Make sure to hold the flat panel display, or projector, securely and remove it from the mount to

make the height adjustment prior to loosening the adjustment screws. Loosen, remove, adjust

then re-tighten the screws. Failure to do so could result in injury and or damage to the display or

projector.

Figure 1. AST-1321 Single Stud Installation

AST-1321 Suspension Adapter

Page - 2 - Installation Instructions

Solid Structure Installation

1. Secure the ceiling plate to the ceiling structure (see WARNING).

2. Use suitable hardware (commercially available) depending on your installation environment to secure the

four (4) mounting points found on the ceiling plate to the ceiling structure (Figure 2).