Powr-Flite PF18 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Powr-Flite PF18 (8 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 6 personen en werd door 3.5 gebruikers gemiddeld met 4.9 sterren beoordeeld

Pagina 1/8
Two-Motor Commercial Upright Vacuum
Powr
-Fliteβ€’ A T
acony Company
3101 Wichita Court β€’ Fort Worth, TX 76140 β€’ 800.880-2913
X8753 2/05
Model PF14 and PF18
OWNERS MANUAL
injury:
●Do not use outdoors or on wet surfaces.
●Do not leave vacuum cleaner
unattended when plugged in. Turn off
the switch and unplug the electrical cord
when not in use and before servicing.
●Do not allow to be used as a toy.
Close attention is necessary when used
by or near children.
●Use only as described in this manual.
Use only manufacturer’s
recommended attachments.
●Do not use with damaged cord or plug.
If vacuum cleaner is not working as it
should, has been dropped damaged, left
outdoors, or dropped into water, return it
to a service center before using.
●Do not pull or carry by cord, use cord as
a handle, close a door on cord, or pull a
cord around sharp edges or corners.
Do not run vacuum cleaner over cord.
Keep cord away from heated surfaces.
●Do not use extension cords or outlets
with inadequate current carrying
capacity.
●Turn off all controls before unplugging.
●Do not handle plug or vacuum cleaner
with wet hands.
●Do not put any objects into openings.
Do not use with any opening blocked,
keep free of dust, lint, hair
, and anything
that may reduce airflow.
●This vacuum cleaner creates suction.
Keep hair, loose clothing, fingers, and all
parts of body away from openings.
●Do not pick up anything that is burning
or smoking, such as cigarettes, matches
or hot ashes. Do not use without dust
bag in place. Use extra care when
cleaning on stairs. Do not use to pick up
flammable or combustible liquids such
as gasoline, or use in areas where they
may be present.
●Store your cleaner indoors in a cool, dry
area.
●Do not unplug by pulling on cord. To
unplug, grasp the plug,
NOT THE CORD.
THIS MODEL IS GROUNDED, CONNECT
TO A PROPERLY GROUNDED
OUTLET ONLY
SEE GROUNDING INSTRUCTIONS.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it
should malfunction or breakdown, ground-
ing provides a path of least resistance for
electric current to reduce the risk of shock.
This appliance is equipped with a cord hav-
ing an equipment-grounding conductor and
grounding plug. The plug must be inserted
into an appropriate outlet that is properly
all local codes and ordinances.
WARNING - Improper connection of the
in a risk of electric shock. Check with a
qualified electrician or service person if you
are in doubt as to whether the outlet is
properly grounded. Do not modify the plug
provided with the appliance - if will not fit
the outlet, have a proper outlet installed by
a qualified electrician.
Note: In Canada, the use of a temporary
adapter is not permitted by the Canadian
Electrical Code.
WARNING
IMPORTANT
R
EAD THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
●Do not vacuum water or liquids.
●Do not vacuum up hard or sharp objects,
as they may damage the hose, vacuum
bag or the vacuum motor.
●Do not drop the vacuum on the floor.
●Do not operate the vacuum while it is
standing on high-pile carpet. It is
essential that the exhaust airflow is
not restricted.
●Do not kink or twist the power cord.
●Do not attempt to service the vacuum
yourself. Repair by anyone other than
an authorized repair service may void
the warranty.
Carefully check carton to signs of damage.
Report damages at once to carrier.
Unpack the machine and check machine
for completeness according to the packing
list. Check the cord plug installed corre-
sponds to your wall outlet.
1. Install handle by sliding it into the
opening in the top of the bag housing
until it bottoms out. Install and tighten
with the thumbscrew.
2. Install the hose by pushing one end into
the top of the bag housing. Push the
other end into the wand.
3. Make sure the dust bag is installed.
For instructions refer to the DUST BAG
REMOVAL AND INSTALLATION.
4. Snap the upholstery tool and crevice
tool into the option mount.
5. Plug the cord pigtail into the outlet at the
back of the vacuum housing.
6.
Plug power cord into outlet at top of
housing (next to handle). The power
switch will glow when cord is connect
to a wall outlet correctly
.
Note: this machine is suitable for voltages
from 110-120 AC/60 Hz.
1. Check to ensure a dust bag is installed.
Replace bag if needed.
2. Check brush area for any thread, string
or debris that may be wrapped around
the brush.
3. Plug the power cord into a receptacle.
4. Adjust the brush height knob to suit the
carpet thickness.
5. Turn the main power switch on.
The vacuum fan motor will turn.
6. While holding the handle depress the
red release and lower the handle to a
convenient operating position. When
the handle is lowered the brush motor
will start turning.
7. Clean the floor using normal vacuuming
procedure.
8. For cleaning with wand, remove the
wand by snapping it out of the retainer
clip and pulling it from its inlet.
The brush motor will stop automatically.
9. Attach tools and clean as you like.
1. Your machine has a red full bag light
which comes on when the airflow is
obstructed, indicating the dust bag
is full.
2. If the light comes on, switch off the
machine, unplug the cord and check
the dust bag. If the bag is not full, there
is an obstruction somewhere in
the system.
3. To remove the bag, open the bag
housing by pushing the door latch.
Fold the ends of the dust bag together
and carefully remove the bag.
4. To install a new dust bag, push the bag
into the inlet of the vacuum intake as
far as ti will go. Fold the top down so it
will not interfere with the door latch.
5.
Close the door
, ensuring that it
latches properly.
BAG REMOVAL
OPERATION
ASSEMBLY
SAFETY PRECAUTIONS


Product specificaties

Merk: Powr-Flite
Categorie: Stofzuiger
Model: PF18

Heb je hulp nodig?

Als je hulp nodig hebt met Powr-Flite PF18 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden