Powertec BD6900 Handleiding

Powertec Schuurmachine BD6900

Lees hieronder de 📖 handleiding in het Nederlandse voor Powertec BD6900 (18 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
Owner’s Manual
Model No. BD6900
6”x 9” DISC/BELT SANDER
WITH BUILT-IN DUST COLLECTION
10-0419
QUESTION...
1•877•393•7121
You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.
Visit us on the web at www.southerntechllc.com
Horsepower (Peak HP).................................................. 1.2
Voltage...........................................................................120
Amp................................................................................7.5
Hertz................................................................................60
Phase.........................................................................Single
RPM.............................................................................3450
Belt size...................................................................6” x 48”
Belt speed...........................................................2400 FPM
Disc diameter....................................................................9”
Disc speed..........................................................3100 RPM
Table dimensions....................................................7” x 10”
Table tilts...............................................................0° to 45°
Dust port diameter............................................................2”
Base dimensions...................................................12” x 19”
TABLE OF CONTENTS PRODUCTION
SPECIFICATIONS
SAFETY RULES 1
Work Preparation
Work Area Preparation
Tool Maintenance
Tool Operation
ASSEMBLY 2
Unpackaging
Tool Needed
Mount Sander
Attach Abrasive Disc
Attach the Table Assembly to Use with Sanding Disc
Attach the Table Assembly to Use with Sanding Belt
Attach Dust Collection Bag
Power Source
Grounding Instructions
Extension Cords
Motor
Electrical Connections
OPERATION 6
ON/OFF Switch
Adjust Belt Tracking Mechanism
Adjust Belt Assembly Position
Adjust Table Tilt Angle
Belt Sanding in Horizontal Position
Operate Sanding Belt
Operate Sanding Disc
Set Up the Miter Gauge
Replace Sanding Belt
Replace Sanding Disc Abrasive
MAINTENANCE 9
General Maintenance
Cleaning
Lubrication
Keep Tool in Repair
TROUBLESHOOTING 10
PARTS ILLUSTRATION & 11
LIST
WARRANTY 14
SECTION PAGE
SAFETY RULES 1
For your own safety, read and understand all warnings
and operating instructions before using any tool or
equipment.
Some dust created by operation of power tool contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
To reduce your exposure to these chemicals: work in a
well ventilated area and work with approved safety
equipment. Always wear OSHA/NIOSH approved,
properly fitting face mask or respirator when using such
tools.
Failure to follow these rules may result in serious personal
injury. Remember that being careless for even a fraction
of a second can result in severe personal injury.
WORK PREPARATION
• Wear proper apparel. Do not wear loose clothing,
gloves, neckties, rings, bracelets or other jewelry which
may get caught in moving parts of the tool.
• Nonslip protective footwear is recommended.
• Wear protective hair covering to contain long hair.
• Wear eye and hearing protection. Always use safety
glasses. Eye protection equipment should comply with
ANSI Z87.1 standards. Hearing equipment should
comply with ANSI S3.19 standards.
• Wear face mask or dust mask if operation is dusty.
• Be alert and think clearly. Never operate power tools
when tired, intoxicated or when taking medications that
cause drowsiness.
WORK AREA PREPARATION
• Keep work area clean. Cluttered work areas and
benches invite accidents.
• Work area should be properly lighted.
• Do not use the machine in a dangerous environment.
The use of power tools in damp or wet locations or in
rain can cause shock or electrocution.
• Three-prong plug should be plugged directly into
properly grounded, three-prong receptacle.
• Use the proper extension cord. Make sure your
extension cord is in good condition and should have a
grounding prong and the three wires of
extension cord should be of the correct gauge.
• Keep children and visitors away. Your shop is a poten-
tially dangerous environment. Children and visitors can
be injured.
• Make your workshop childproof with padlocks, master
switches or remove switch keys to prevent any uninten-
tional use of power tools.
TOOL MAINTENANCE
• Turn the machine "OFF", and disconnect the machine
from the power source prior to inspection.
• Maintain all tools and machines in peak condition. Keep
tools sharp and clean for best and safest performance.
• Follow instructions for lubricating and changing
accessories.
• Check for damaged parts. Check for alignment of
moving parts, binding, breakage, mounting and any
other condition that may affect tool's operation.
• Poorly maintained tools and machines can further
damage the tool or machine and/or cause injury.
• A guard or any other part that is damaged should be
repaired or replaced. Do not perform makeshift repairs.
TOOL OPERATION
• Avoid accidental start-up. Make sure that the tool is in
the “OFF” position before plugging in.
• Use the right tool for your job. Do not force your
tool or attachment to do a job for which it was not
designed.
• Disconnect tool when changing parts.
• Don't force the workpiece on the machine. Damage to
the machine and/or injury may result.
• Never leave tool running unattended. Turn the power off
and do not leave tool until it comes to a complete stop.
• Do not overreach. Loss of balance can make you fall
into a working machine, causing injury.
• Never stand on tool. Injury could occur if the tool tips, or
if you accidentally contact the cutting tool.
• Know your tool. Learn the tool’s operation, application
and specific limitations before using it.
• Use recommended accessories. Use of improper
accessories may cause damage to the machine or injury
to the user.
• Handle workpiece correctly. Keep hands away from
moving parts.
• Turn tool off if it jams.
• Always feed workpiece against the direction of the
sanding rotation. To maintain control, properly support
long or wide work-pieces.
CAUTION: Think safety! Safety is a combination of opera-
tor common sense and alertness at all times when tool is
being used.
Do not attempt to operate tool until it is completely
assembled according to the instructions.
WARNING
WARNING
WARNING
WARNING

Product specificaties

Merk: Powertec
Categorie: Schuurmachine
Model: BD6900

Heb je hulp nodig?

Als je hulp nodig hebt met Powertec BD6900 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schuurmachine Powertec

Powertec

Powertec BD6900 Handleiding

27 Juni 2023

Handleiding Schuurmachine

Nieuwste handleidingen voor Schuurmachine

Duro Pro

Duro Pro D-NTS 156 Handleiding

18 April 2024
Bavaria By Einhell

Bavaria By Einhell BES 125 E Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BBS 850 E Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BSS 280 Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BBS 1200 Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BSS 105 Handleiding

9 April 2024
Einhell Bavaria

Einhell Bavaria BSS 105 Handleiding

25 Maart 2024
Einhell Bavaria

Einhell Bavaria BBS 1200 Handleiding

25 Maart 2024
Einhell Bavaria

Einhell Bavaria BSS 280 Handleiding

25 Maart 2024
Einhell Bavaria

Einhell Bavaria BBS 850 E Handleiding

25 Maart 2024