Powersoft Mezzo 322 A Handleiding
Pagina's 40 Receiver
Bekijk de handleiding van Powersoft Mezzo 322 A gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
Keep this manual
for future reference
©2025 Powerso
USER GUIDE
GUIDA UTENTE / BENUTZERHANDBUCH / MODE D'EMPLOI
GUÍA DEL USUARIO / GUIA DE USARIO
دليل المستخدم / ユーザーガイド
快速指南
Serie Mezzo / Mezzo-Serie / Mezzo
Série
Serie Mezzo / Série Mezzo
سلسلة Mezzo / Mezzo シリーズ
Mezzo系列
Mezzo Series
DO000257.05 R00
Mezzo 602, Mezzo 604 A/A+/AD
Mezzo 322, Mezzo 324 A/A+/AD
STATUS
NETWORK
SIGNAL
MEZZO
STATUS
NETWORK
SIGNAL
MEZZO
2 | MEZZO Series
EN
Safety Warnings
+50 C
0 °C
OPERATING TEMPERATURE RANGE: 0°C TO +50°C - DERATING ABOVE 35°C.
10%
85%
%
STORAGE RELATIVE HUMIDITY RANGE: 10% TO 85% HUMIDITY (NON CONDENSING).
DO NOT USE THE UNIT AT ALTITUDES ABOVE 2000 M.
DO NOT USE THE UNIT IN TROPICAL ENVIRONMENT.
CLASS3
WIRING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ATTEMPT TO OPEN ANY PART OF THE UNIT. NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CLASS3
WIRING
CONNECTION TO THE MAINS SHALL BE DONE ONLY BY A ELECTROTECHNICAL SKILLED PERSON
ACCORDING THE NATIONAL REQUIREMENTS OF THE COUNTRIES WHERE THE UNIT IS SOLD.
CLASS3
WIRING
DO NOT USE THIS AMPLIFIER IF THE ELECTRICAL POWER CORD IS FRAYED OR BROKEN.
CLASS3
WIRING
TO AVOID ELECTRICAL SHOCK, DO NOT TOUCH ANY EXPOSED SPEAKER WIRING WHILE THE
AMPLIFIER IS OPERATING.
CLASS3
WIRING
DO NOT SPILL WATER OR OTHER LIQUIDS INTO OR ON THE AMPLIFIER.
CLASS3
WIRING
THIS DEVICE MUST BE POWERED EXCLUSIVELY BY EARTH CONNECTED MAINS SOCKETS IN
ELECTRICAL NETWORKS COMPLIANT TO THE IEC 364 OR SIMILAR RULES
CLASS3
WIRING
DISCONNECT THE AC MAINS SOURCE BEFORE ATTEMPTING TO CLEAN ANY PART OF THE AMPLIFIER
CLASS3
WIRING
THE BREAKER NEEDS TO SUPPORT 375 VA PER MEZZO, SO MAX 3 MEZZO PER OUTLET AT 115V 10A,
OR MAX 6 MEZZO PER OUTLET WITH 230V 10A
CLASS2CLASS2
WIRINGWIRING
OUTPUT TERMINALS ARE HAZARDOUS: WIRING CONNECTION TO THESE TERMINALS REQUIRES
INSTALLATION BY AN INSTRUCTED PERSON AND THE USE OF READY MADE LEADS.
CLASS3
WIRING
PROPERLY FIT THE AC MAINS PLUG TO THE AMPLIFIER INLET.
BEFORE POWERING THIS AMPLIFIER, VERIFY THAT THE CORRECT VOLTAGE RATING IS BEING USED.
CLASS3
WIRING
TAKE CARE TO LOCK THE OUTPUT TERMINAL BEFORE SWITCHING THE DEVICE ON.
CLASS3
WIRING
VERIFY THAT YOUR MAINS CONNECTION IS CAPABLE OF SATISFYING THE POWER RATINGS OF THE
DEVICE.
CLASS3
WIRING
NO NAKED FLAME SOURCES SUCH AS LIGHTED CANDLES SHOULD BE PLACED ON THE AMPLIFIER.
CLASS3
WIRING
IT IS HIGHLY RECOMMENDED TO UNPLUG THE OUTPUT CONNECTORS BEFORE PROCEEDING WITH
THE SELF CHECK PROCEDURE
CLASS3
WIRING
THE TESTING SIGNALS MIGHT CAUSE LOUDSPEAKER IMPAIRMENTS.
CLASS3
WIRING
WARNING TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR/
WALL/RACK IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.
CLASS3
WIRING
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGES CAUSED TO PERSONS,
THINGS OR DATA DUE TO AN IMPROPER OR MISSING GROUND CONNECTION.
CLASS3
WIRING
IT IS ABSOLUTELY NECESSARY TO VERIFY THESE FUNDAMENTAL REQUIREMENTS OF SAFETY AND, IN
CASE OF DOUBT, REQUIRE AN ACCURATE CHECK BY QUALIFIED PERSONNEL.
Common symbols and meanings
CLASS3
WIRING
THE TRIANGLE WITH THE LIGHTNING BOLT IS USED TO ALERT THE USER TO THE RISK OF ELECTRIC
SHOCK.
CLASS3
WIRING
THE TRIANGLE WITH THE EXCLAMATION POINT IS USED TO ALERT THE USER TO IMPORTANT
OPERATING OR MAINTENANCE INSTRUCTIONS.
THE CE-MARK INDICATES THE COMPLIANCE OF THE PRODUCT TO ALL THE APPLICABLE EUROPEAN
DIRECTIVES
SYMBOL FOR EARTH/GROUND CONNECTION.
SYMBOL INDICATING THAT THE EQUIPMENT IS FOR INDOOR USE ONLY.
SYMBOL FOR CONFORMITY WITH DIRECTIVE 2012/19/EC OF THE EUROPEAN PARLIAMENT ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE).
1.
2.
3. Heed all warnings.
4.
5. Do not use this equipment near water.
6. Clean only with a dry cloth.
7.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
10.
11.
12.
13. Unplug this apparatus during lightning storms or when unused for long
14.
Warranty and Technical Service
Service Centre.
For any service related enquiry, please visit
CLASS3
WIRING
MEZZO Series | 3
EN
EC Declaraon Of Conformity
Manufacturer:
Powerso S.p.A.
via E. Con 5
50018 Scandicci (Fi)
Italy
We declare that under our sole responsibility the products:
Model Names:
MEZZO 322 A
MEZZO 324 A
MEZZO 602 A
MEZZO 604 A
MEZZO 322 A+
MEZZO 324 A+
MEZZO 602 A+
MEZZO 604 A+
MEZZO 322 AD
MEZZO 324 AD
MEZZO 602 AD
MEZZO 604 AD
Intended use: Professional Audio Amplier
Are in conformity with the provisions of the following EC
Direcves, including all amendments, and with naonal legislaon
implemenng these direcves:
2014/35/EU Low Voltage Direcve
2014/30/EU Electromagnec Compability Direcve
2011/65/EU RoHs Direcve
The following harmonized standards are applied:
EN 55032:2015,
EN 55032:2015 /A11:2020
EN 55035:2017,
EN 55035:2017 /A11:2020
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61000-3-11:2000
EN 62368-1:2014
EN 62368-1:2014 /AC:2015
Scandicci,
January 2022
For compliance quesons only: compliance@powerso.it
Regulatory Compliance Statements
Europe
If the me arises to dispose of your product, please recycle all possible component.
This symbol indicates that when the end-user wishes to discard this product,
it must be sent to separate collecon facilies for recovery and recycling.
By separang this product from other household-type waste, the volume of
waste sent to incinerators or land-lls will be reduced and natural resources
will thus be conserved.
The Waste Electrical and Electronic Equipment Direcve (WEEE Direcve) aims to
minimise the impact of electrical and electronic goods on the environment. Powerso
S.p.A. comply with the Direcve 2012/19/EU of the European Parliament on waste
electrical nance the cost of treatment and recovery of electronic equipment (WEEE)
in order to reduce the amount of WEEE that is being disposed of in land-ll site.
All of our products are marked with the WEEE symbol; this indicates that this product
must NOT be disposed of with other waste. Instead it is the user’s responsibility to
dispose of their waste electrical and electronic equipment by handing it over to an
approved reprocessor, or by returning it to Powerso S.p.A. for reprocessing. For
more informaon about where you can send your waste equipment for recycling,
please contact Powerso S.p.A. or one of your local distributors.
USA
FCC Supplier’s Declaraon of Conformity
Responsible Party:
Powerso S.p.A.
Via Enrico Con, 5
50018 Scandicci (FI) – Italy
Phone: +39 055 735 0230
Fax: +39 055 735 6235
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operaon is subject to the
following two condions:
1) This device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may
cause undesired operaon.
CAUTION: Changes or modicaons not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instrucon manual, may cause harmful interference
to radio communicaons. However, there is no guarantee that interference will not
occur in a parcular installaon. If this equipment does cause harmful interference
to radio or television recepon, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit
• Dierent from that to which the receiver is connected.
Canada
Canadian Cauon
This device contains licence-exempt transmier(s)/receiver(s) that comply with
Innovaon, Science and Economic Development Canada’s licence-exempt RSS(s).
Operaon is subject to the following two condions:
1)This device may not cause interference.
2)This device must accept any interference, including interference that may cause
undesired operaon of the device.
Radiaon Exposure Statement
This equipment complies with RSS-102 radiaon exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Product specificaties
| Merk: | Powersoft |
| Categorie: | Receiver |
| Model: | Mezzo 322 A |
Heb je hulp nodig?
Als je hulp nodig hebt met Powersoft Mezzo 322 A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden