POSline SC2100 Handleiding

POSline Barcode lezer SC2100

Bekijk gratis de handleiding van POSline SC2100 (52 pagina’s), behorend tot de categorie Barcode lezer . Deze gids werd als nuttig beoordeeld door 79 mensen en kreeg gemiddeld 3.7 sterren uit 40 reviews. Heb je een vraag over POSline SC2100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/52

Ba code Scannerr

Magstripe

P ogrammingr Manual

Decoder & Scanner

Getting Started ............................................................ 2

Setup Procedures ....................................................... 3

Setup Flow Chart .........................................................4

Group 0 : Interface Selection................................ 5

Group 1 : Device Selection for keyboard

Interface.............................................6-7

Group 2 : Inter-character Delay.............................8

Group 3 : Language for Keyboard Interface... 9-10

Group 4 : Terminator......................................11-12

Group 5 : Scan Mode.....................................13-14

Group 6 : Preamble and Postamble.....................15

.....................

.......................

............................. 2

....................

......................................

....................................

............................................

..............................................

.....................................

....................................

................................................

................................

...............................................

....................................

................................................

.........................................

..............................

.................................

......................

.................... 3

..........................

....................4

.....................

..............................

..................................................

.........

.....................

Group 7 : RS-232 Parameters... 16-18

Group 8 : Code 39 / Code 32... 19-20

Group 9-1 : Interleaved 2 of 5... 1

Group 9-2 : Industrial 2 of 5 / IATA... 22

Group 9-3 : Matrix 2 of 5. 23

Group 9-4 : China Postage. 24

Group 10 : Code 128. 25

Group 11 : Code 11. 26

Group 12 : Code 93. 27

Group 13 : MSI-PLESSY. 28

Group 14 : Codabar/NW7. 29

Group 15 : Code 4. 30

Group 16-1 : EAN-13/JAN-13. 31

Group 16-2 : UPC-A . 32

Group 16-3 : EAN-8/JAN-8. 33

Group 16-4 : UPC-E. 34

Group 16-5 : ISBN/ISSN. 35

Group 17 : General Parameter. 36

Group 18 : Code ID Setting. 37

Group 19 : Wand Type Parameters. 38

Group 20-1 : Magnetic Parameters. 9-40

Group 20-2 : Magnetic Parameters. 41

Group 21 : Function Key Emulation. 2

Function Code for PC XT/AT. 43-44

Table-Hex : Hexadecimal. 45

ASCII Table. 46

Hexadecimal-Decimal Conversion Table. 47

Pin Assignments .................. 48-49

CONTENTS

Getting Started

To install a keyboard wedge barcode scanne ,r follow the steps

listed below:

1) Make sure that the scanner has the correct Y (U)-

cable for the system (a PC or terminal)

2) Turn off the power of the system

3) Unplug the keyboard from the system

4) Connect the Y (U)- cable to the system and

keyboard

5) Turn on the power of the system

6) If the indicator LED lights up and the buzzer

sounds, the scanner is ready for reading

To install a RS-232 interface scanner, the host device

should have a RS-232 port to receive data from the

scanner, follow the steps listed below:

1) Make sure that the scanner has the right connector

for the RS-232 port of the host device

2) Make sure that there is a power supply to the

scanner (if necessary)

3) Connect the cable to the RS-232 port of the device

4) If the indicator LED lights up and the buzzer

sounds, the scanner is ready for reading

Installing Keyboard Wedge Scanner

Installing a RS-232 Interface Barcode Scanner

Product specificaties

Merk:	POSline
Categorie:	Barcode lezer
Model:	SC2100
Kleur van het product:	Grijs
Gewicht:	130 g
Snoerlengte:	2 m
Certificering:	FCC A, CE
Type beeldsensor:	CCD
Ingangsspanning:	5 V
Temperatuur bij opslag:	-10 - 60 °C
Golflengte:	660 nm
Stroomverbruik:	60 mA
Standaard interfaces:	PS/2
Afmetingen (B x D x H):	89 x 180 x 36 mm
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Lees-snelheid (max):	33 lezingen/s
Werkafstand:	15 mm
Scannerresolutie:	0.1 mm