Posiflex PD-2600 Handleiding
Posiflex
Niet gecategoriseerd
PD-2600
Bekijk gratis de handleiding van Posiflex PD-2600 (11 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.8 sterren uit 2 reviews. Heb je een vraag over Posiflex PD-2600 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/11
Part 1
FCC NOTES
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential environment this
equipment may cause radio interference.
AVERTISSEMENT CE CLASSE A
Cet équipement est conforme à la classe A de CISPR 32. Dans un environnement résidentiel, cet
équipement peut provoquer des interférences radio.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other than the
authorized technicians. The user should consult his/her dealer for the problem happening.
Warranty voids if the user does not follow the instructions in application of this merchandise. The
manufacturer is by no means responsible for any damage or hazard caused by improper application.
LIMITES DE GARANTIE
La garantie prend n automatiquement lorsque la machine est ouverte par une personne autre que
les techniciens autorisés. L'utilisateur doit consulter son revendeur pour le problème qui se produit.
La garantie s'annule si l'utilisateur ne suit pas les instructions d'application de cette marchandise.
Le fabricant n'est en aucun cas responsable de tout dommage ou danger causé par une mauvaise
application.
警告
警告
警告
警告警告
為避免電磁干擾，本產品不應安裝或使用於住宅環境。
SAFETY INSTRUCTIONS
This equipment is not suitable for use in locations where children are likely to be present.
CONSIGNES DE SÉ CURITÉ
Cet équipement ne convient pas à une utilisation dans des lieux pouvant accueillir des enfants.
PD – 2600 / 2601 / 2602 Series / 2603
User’s Manual Rev. D0
Part 2
BRIEF INTRODUCTION
THE PRODUCT
The PD-2600 is a stand alone pole mount customer display designed for
discrete POS applications. The PD-2601 is a pole mount customer display
option designed for Posiex HT series POS terminals and also the PB series
discrete systems. The PD-2602 is a pole mount customer display option
designed for Posiex KS or TP series touch POS terminals. The PD- 3 is a 260
pole mount customer display option designed for Posiex series touch POS FT
terminals. It is delivered in separate carton for HT / PB / KS / TP / FT series
and shall be installed per instruction in this manual.
FEATURES
Bright VFD (vacuum uorescent display) with green or blue lter
Rear mount Pole Display for Posiex HT series hybrid terminals or
PB series discrete systems or KS or FT series fan free touch POS
terminals or TP series touch POS terminals
Two-line display with 20 characters per line
Adequately large characters for easy viewing (9.03 mm by 5.25
mm)
Long life and trouble free operation
15° ° °, 30 and 45 adjustable viewing angles
Total height (Stand alone) 410 mm
Total height mm (PD- base o HT and PB series) 392 2601 on f
Total height 3 mm (PD- base of KS and TP series) 25 2602 on
Total height 3 mm (PD- 3 on base of series) 75 260 FT
Display frame can rotate horizontally 270 freely
Various command emulation modes selectable by DIP switch
Support 12 Code Pages of 128 characters each
Support 12 international character sets of 12 characters each
Simple installation
Selectable between Serial (RS232) interface model and USB
interface model
Supports UPOS 1.8 and is WEPOS ready
Case color choices: ivory, black for HT terminals or black for FT,
KS and TP terminals
Part 3
INSTALLATION GUIDES
HOST SYSTEM PREPARAION
For serial interface (RS232) PD-2601or PD- or PD-2603 to be used in HT 2602
or PB or KS or TP or FT series, you have to adjust during power o the
internal jumper of the host system to to the COM port selected supply 5 V DC
for the serial interface pole display. This adjustment has to be done by a
qualied electronic technician following guide from relevant technical manual.
The default communication protocol should be set to 9600 bps, none parity, 8
data bits, 1 stop bit with hardware handshaking on CTS. The power for the
USB interface type pole display is supported through the USB connection.
However, should these customer displays are to be connected through an USB
HUB instead of a direct USB port of the system, the HUB must be powered by
a separate power adaptor otherwise there could be the power shortage problem.
INSTALLING PD-2600
In base of stand alone models (PD-2600 models only), looking from rear side
of the bottom, the connector area will look like below:
For serial (RS232) interface models:
The RJ45 type modular connector is for internal use and is already occupied.
The RS232 input port is a DB9 female connector. Connect the attached RS-
232 signal cable to this port and one of the COM port in the host system. Set
the RS-232 communication protocol for this port to 9600 bps, no parity, 8 bits,
1 stop bit with hardware handshaking. Connect the power adaptor to the
rightmost power connector. Turn on the switch in the front side of the base.
For USB interface models:
The RJ45 type modular connector is for internal use and is also already
occupied. type connector of the interface USB in Connect the “B” cable to “ ”
connector area and the A type end to USB port of the host. Insert the 2 pin or “ ”
To Display head
24 VDC
24 VDC
RS232 In
12 VAC In
12 VAC In
+24 V DC In
+24 V DC Out
To Display head
USB
Product specificaties
| Merk: | Posiflex |
| Categorie: | Niet gecategoriseerd |
| Model: | PD-2600 |
Heb je hulp nodig?
Als je hulp nodig hebt met Posiflex PD-2600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Posiflex
7 Mei 2025
7 Mei 2025
7 Mei 2025
22 April 2025
22 April 2025
22 April 2025
9 December 2024
9 December 2024
6 September 2024
6 September 2024
Handleiding Niet gecategoriseerd
- Omnires
- Merax
- Cisco
- Audio-Technica
- Innovative
- Ordex
- Summer Infant
- Thronmax
- DAP Audio
- Phonic
- LTC
- Berker
- Kora
- NEO Tools
- Echowell
Nieuwste handleidingen voor Niet gecategoriseerd
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025