Porter-Cable PC120ID Handleiding
Porter-Cable
Boormachine
PC120ID
Bekijk gratis de handleiding van Porter-Cable PC120ID (40 pagina’s), behorend tot de categorie Boormachine. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over Porter-Cable PC120ID of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/40
12 and 18 Volt
Cordless Impact Driver
Instruction manual
Manuel d'instructions
Manual de'instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN,
CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA.
ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
CATALOG NUMBERS
PCL180ID
PC1200ID
PC1800ID
Visseuse à percussion
sans fil de 12 V et 18 V
Destornillador de impacto
inalámbrico de 12V y 18 V
Batteries and chargers sold separately
90550107 PC1800ID, PC1200ID 4/1/09 9:33 AM Page 1
2
General Power Tool Safety Warnings
Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
:
90550107 PC1800ID, PC1200ID 4/1/09 9:33 AM Page 2
Product specificaties
| Merk: | Porter-Cable |
| Categorie: | Boormachine |
| Model: | PC120ID |
Heb je hulp nodig?
Als je hulp nodig hebt met Porter-Cable PC120ID stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Porter-Cable
16 November 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
23 Mei 2024
3 Mei 2023
30 April 2023
17 Februari 2023
Handleiding Boormachine
- Stomer
- Yato
- Biltema
- Mafell
- Proviel
- Mac Tools
- Bort
- Parkside
- NEO Tools
- McKenzie
- Craftsman
- Verto
- G-Technology
- Total
- Hazet
Nieuwste handleidingen voor Boormachine
16 September 2025
16 September 2025
15 September 2025
15 September 2025
13 September 2025
13 September 2025
12 September 2025
12 September 2025
9 September 2025
8 September 2025